peb3456 Infineon Technologies Corporation, peb3456 Datasheet - Page 219

• Manufacturer Part Number: peb3456
• Description: Channelized T3 Termination With Ds3 Framer, M13 Multiplexer, T1/ E1 Framers And 256 Channel Hdlc/ppp Controller
• Manufacturer: Infineon Technologies Corporation

SPA
RCL
LPID
LCID
Data Sheet
1
Synchronization Pulse Access
This bit field selects one framer 0..27 whose synchronization pulse can
be externally monitored. Only valid if RSPEN is set.
Remote Channel Loop
The remote channel loop switches incoming data of one channel to the
outgoing bit stream of the same channel. The bit rate of the receiver and
the transmitter must be the same. The channel to be looped can be
selected using bit field LCID. One channel at a time can be looped.
0
1
Port Identifier
This bit field selects the port which shall be switched to the test port. See
also bit CONF1.TBE.
Loop Channel Identifier
This bit field selects the channel which shall be looped through the
internal loop buffer.
The internally generated synchronization pulse of input port
CONF2.SPA is switched to pin RSPO for test purposes.
Disable remote channel loop.
Enable remote channel loop.
219
Register Description
PEB 3456 E
05.2001