UPD78F0413GA-GAM-AX NEC, UPD78F0413GA-GAM-AX Datasheet - Page 310

• Manufacturer Part Number: UPD78F0413GA-GAM-AX
• Description: 8BIT UC, 32K FLASH, 1KB RAM, LCD
• Manufacturer: NEC

Specifications of UPD78F0413GA-GAM-AX

• Controller Family/series: UPD78F
• No. Of I/o's: 30
• Ram Memory Size: 1024Byte
• Cpu Speed: 10MHz
• No. Of Timers: 8
• No. Of Pwm: RoHS Compliant
• Core Size: 8bit
• Program Memory Size: 32KB
• Oscillator Type: External, Internal

(5) ANI0/SEG21/P20 to ANI5/SEG16/P25 pins
(6) Input impedance of ANI0 to ANI5 pins
(7) AV
310
<1> The analog input pins (ANI0 to ANI5) are also used as I/O port pins (P20 to P25).
<2> If a digital pulse is input or output, or segment-output to the pins adjacent to the pins currently used for A/D
This A/D converter charges a sampling capacitor for sampling during sampling time.
Therefore, only a leakage current flows when sampling is not in progress, and a current that charges the
capacitor flows during sampling. Consequently, the input impedance fluctuates depending on whether sampling
is in progress, and on the other states.
To make sure that sampling is effective, however, it is recommended to keep the output impedance of the analog
input source to within 10 k , and to connect a capacitor of about 100 pF to the ANI0 to ANI5 pins (see Figure 12-
20).
A series resistor string of several tens of k is connected between the AV
Therefore, if the output impedance of the reference voltage source is high, this will result in a series connection to
the series resistor string between the AV
Reference
C = 100 to 1,000 pF
REF
voltage
input
When A/D conversion is performed with any of ANI0 to ANI5 selected, do not access P20 to P25 while
conversion is in progress; otherwise the conversion resolution may be degraded. It is recommended to any
pin of P20 to P25 used as digital I/O port starting with the ANI0/P20 that is the furthest from AV
conversion, the expected value of the A/D conversion may not be obtained due to coupling noise.
Therefore, do not input or output a pulse, or segment-output to the pins adjacent to the pin undergoing A/D
conversion.
pin input impedance
CHAPTER 12 10-BIT SUCCESSIVE APPROXIMATION TYPE A/D CONVERTER ( PD78F041x only)
Figure 12-20. Analog Input Pin Connection
REF
User’s Manual U18698EJ1V0UD
and AV
AV
AV
V
ANI0 to ANI5
SS
REF
SS
If there is a possibility that noise equal to or higher than AV
equal to or lower than AV
small V
SS
pins, resulting in a large reference voltage error.
F
value (0.3 V or lower).
SS
REF
may enter, clamp with a diode with a
and AV
SS
pins.
REF
REF
.
or