DF3048X16V Renesas Electronics America, DF3048X16V Datasheet - Page 132

• Manufacturer Part Number: DF3048X16V
• Description: MCU 5V 128K,PB-FREE 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of DF3048X16V

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 16MHz
• Connectivity: SCI, SmartCard
• Peripherals: DMA, PWM, WDT
• Number Of I /o: 70
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Section 5 Interrupt Controller
Figure 5.3 shows the timing of the setting of the interrupt flags (IRQnF).
Interrupts IRQ
whether the corresponding pin is set for input or output. When using a pin for external interrupt
input, clear its DDR bit to 0 and do not use the pin for chip select output, refresh output, or SCI
input or output.
5.3.2
Thirty internal interrupts are requested from the on-chip supporting modules.
5.3.3
Table 5.3 lists the interrupt sources, their vector addresses, and their default priority order. In the
default priority order, smaller vector numbers have higher priority. The priority of interrupts other
than NMI can be changed in IPRA and IPRB. The priority order after a reset is the default order
shown in table 5.3.
Rev. 7.00 Sep 21, 2005 page 106 of 878
REJ09B0259-0700
Each on-chip supporting module has status flags for indicating interrupt status, and enable bits
for enabling or disabling interrupts.
Interrupt priority levels can be assigned in IPRA and IPRB.
ITU and SCI interrupt requests can activate the DMAC, in which case no interrupt request is
sent to the interrupt controller, and the I and UI bits are disregarded.
IRQn
input pin
IRQnF
Note: n = 5 to 0
Internal Interrupts
Interrupt Vector Table
0
to IRQ
5
have vector numbers 12 to 17. These interrupts are detected regardless of
Figure 5.3 Timing of Setting of IRQnF