LFXP2-17E-5FN484I Lattice, LFXP2-17E-5FN484I Datasheet - Page 327

• Manufacturer Part Number: LFXP2-17E-5FN484I
• Description: FPGA - Field Programmable Gate Array 17K LUTs 358 I/O Ins on DSP 1.2V -5 Spd
• Manufacturer: Lattice

Specifications of LFXP2-17E-5FN484I

• Number Of Macrocells: 17000
• Number Of Programmable I/os: 358
• Data Ram Size: 282624
• Supply Voltage (max): 1.26 V
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Supply Voltage (min): 1.14 V
• Package / Case: FPBGA-484
• Number Of Logic Elements/cells: *
• Number Of Labs/clbs: *
• Total Ram Bits: 282624
• Number Of I /o: 358
• Number Of Gates: -
• Voltage - Supply: 1.14 V ~ 1.26 V
• Mounting Type: *
• Operating Temperature: -40°C ~ 100°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Lattice Semiconductor
Programming Procedures
Part 1: Program the Golden Pattern into the SPI Flash Devices
The SPI Flash device stores the Golden Pattern for the LatticeXP2 device. The Master SPI port requires the
Golden Pattern to be in a bitstream format. The bitstream format is exactly the same as the LatticeECP/2/3 FPGA
family of devices. The bitstream format can be found in the reference section at the end of this document.
For LatticeXP2 FPGA products, Lattice’s design software, ispLEVER
File Writer (ispUFW
into the bitstream file for the Master SPI port. The procedure is shown in Figure 17-1and Table 17-3.
Figure 17-1. Using the ispUFW to Convert a JEDEC File to a Bitstream
Table 17-3. Procedure for Converting a JEDEC File to a Bitstream using the ispUFW
Steps
1
2
3
4
Launch the UFW on ispVM.
Select the bitstream file as the output format.
Browse for the JEDEC input file name. The device name will be extracted from the JEDEC file.
Browse or enter the output file name.
®
) utility shipped with the ispVM
®
3
3 3
System can be used to convert the LatticeXP2 JEDEC file
17-9
4
4 4
Description
1
1 1
5
5
®
, only generates a JEDEC file. The Universal
LatticeXP2 Dual Boot Feature
2
2 2
6
6 6