IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 148

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Note:
11.3.2.1
11.3.2.2
Intel NetStructure
TPS
148
®
The image should be loaded into RAM and run using the commands:
The user may choose to upgrade all components using the fis all command or upgrade
specific components using other fis commands as described in the following
subsections.
After performing the fis all or fis ssu_upgrade -a -o commands, the SSU images should be
validated using the specified command sequence (see
Section
fis all
The fis all command is equivalent to performing the following sequence of commands:
If the Recovery Loader needs to be upgraded also, the following additional command
sequence must be issued:
Issuing the fis all command results in oneshot mode operation. After executing the fis all
command, the following command sequence should be used to validate the operation
and check the firmware components configuration:
fis manifest
The fis manifest command lists all images that are contained in the currently running
appimage. The following is a sample output:
Appimage> fis manifest
SSU-capable images:
LION_ssu.bin
redboot.ssu
Other FLASH images:
diag_ixdp2801_ssu.bin
FRU binaries:
ixmb2801_3a_fru.bin
ixmb2801_4_fru.bin
ixmb2801_4_rohs5_fru.bin
ixmb2801_3a_nofic_fru.bin
ixmb2801_4_nofic_fru.bin
IXB2850 Packet Processing Boards
RedBoot> load -m tftp -r -b 0x10000000 /tftpdir/IXB28x0_upgrade.bin
RedBoot> go 0x10000000
Appimage> fis fru_upgrade -a
Appimage> fis sdr_upgrade -a
Appimage> fis fis_upgrade -i diag
Appimage> fis ssu_upgrade -a -o
Appimage> fis image
Appimage> reset
Appimage> reset
....
RedBoot> reset bmc
RedBoot> ssu validate -i all
RedBoot> cfg verify
11.3.2.5).
for bb
for bb
for bb
for bb
for bb
(Main board FRU, spin 3A with FIC)
(Main board FRU, spin 4 with FIC)
(Main board FRU, spin 4 with FIC (RoHS 5/6))
(Main board FRU, spin 3A without FIC)
(Main board FRU, spin 4 without FIC)
Section 11.3.2.1
Document Number: 05-2443-006
IXB2850—Maintenance
and
January 2007