IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 220

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

A.2.99
Note:
Warning:
A.2.100
Intel NetStructure
TPS
220
®
Parameters
Example
update bmc -b 0x1000000 -l <length>
update fru
Stores new field replaceable unit (FRU) information in a given component’s EEPROM.
The FRU update fails if there is a hardware protection (write protect) on the appropriate
board ID EEPROM.
Before running this command, you must use the
information into RAM.
Running this command erases all information in the given FRU, including MAC
addresses. Before performing this command, you should use the
and note the MAC address settings and after resetting the board, write and save them
using the
Syntax
update fru -c <component> -b <base_address> -l <length> -o
Parameters
Example
update fru -c bb -b 0x1000000 -l <length>
update sdr
Stores new Sensor Device Record (SDR) information for a given configuration in
EEPROM.
• -b <base_address> - The RAM address where the new BMC firmware has been
• -l <length> - The length of the new BMC firmware in RAM.
• -c <component> - The component to change/assign FRU information to:
• -b <base_address> - The RAM address where the new FRU information is to be
• -l <length> - The length of the new FRU information in RAM.
• -o - Forces MAC addresses, serial numbers, custom OEM records (id=1 and id=2,
IXB2850 Packet Processing Boards
loaded.
loaded
version 0.0) and all other unknown type records to be overwritten with information
from the FRU file.
— bb - baseboard
— db1 - media mezzanine card 1 (not used on IXB2850 boards)
— db2 - media mezzanine card 2
— mic1 - media interface card 1 (not used on IXB2850 boards)
— mic2 - media interface card 2
— fic - fabric interface card
— npmod - network processor module
— ap - adjunct processor card
cfg mac
and
cfg save
commands.
load
IXB2850—Boot Monitor Console Commands
command to load the new FRU
Document Number: 05-2443-006
cfg read
command
January 2007