IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 193

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Boot Monitor Console Commands—IXB2850
A.2.30
Caution:
A.2.31
A.2.32
January 2007
Document Number: 05-2443-006
fis init
Initialize the Flash Image System (FIS).
Execution of this command causes loss of information previously stored in the FIS.
Syntax
fis init [-f] [-d]
Parameters
Example
fis init
fis list
List the images currently available in the FIS.
Syntax
fis list [-c] [-d]
Parameters
Example
fis list -d
fis load
Transfer an image from flash to RAM. After the image has been loaded, it may be
executed using the go command.
Syntax
fis load [-b <load_address>] [-c] [-d] name [-w] [-s]
Parameters
• -f - All blocks of flash memory (except for the boot blocks) are erased as part of the
• -d - Create a dual bootmonitor (RedBoot) image.
• -c - Show the image checksum instead of memory address
• -d - Show the image data length instead of the amount of flash occupied by the
• -b <load_address> - Address to which the image should be loaded (the default
• -c - Compute and print the checksum of the image after it has been loaded
• -d - Decompress gzipped image while copying it to RAM
• name - The name of the file as shown in the FIS directory
• -w - Read the flash in 32-bit mode
initialization procedure.
image
value is the address associated with the image)
Intel NetStructure
®
IXB2850 Packet Processing Boards
TPS
193