IXB28504XGBEFS Intel, IXB28504XGBEFS Datasheet - Page 221

• Manufacturer Part Number: IXB28504XGBEFS
• Manufacturer: Intel

Specifications of IXB28504XGBEFS

• Lead Free Status / Rohs Status: Compliant

Boot Monitor Console Commands—IXB2850
Note:
A.2.101
A.2.102
January 2007
Document Number: 05-2443-006
Before running this command, the load command must be executed to load new SDR
information to RAM.
Syntax
update sdr -c <component> -b <start_address> -l <length>
Parameters
Example
update sdr -c bb -b 0x3000000 -l 0x76f
version
Display RedBoot version information.
Syntax
version
Example
version
watchdog
Turn watchdog on or off.
Syntax
watchdog on -t <sec>
watchdog off
Parameters
Example
watchdog on -t 60
• -c <component> - The component to change/assign FRU information to:
• -b <start_address> - The RAM address where the new SDR information has been
• -l <length> - The length of the new SDR information in RAM.
• -t <sec> - Turn the watchdog timeout on for <sec> seconds.
loaded.
— bb - baseboard
— db1 - media mezzanine card 1 (not used on IXB2850 boards)
— db2 - media mezzanine card 2
— mic1 - media interface card 1 (not used on IXB2850 boards)
— mic2 - media interface card 2
— fic - fabric interface card
— npmod - network processor module
— ap - adjunct processor card
Intel NetStructure
®
IXB2850 Packet Processing Boards
TPS
221