PEB3081FV14XP Lantiq, PEB3081FV14XP Datasheet - Page 62

• Manufacturer Part Number: PEB3081FV14XP
• Manufacturer: Lantiq

Specifications of PEB3081FV14XP

• Number Of Line Interfaces: 1
• Control Interface: HDLC
• Lead Free Status / Rohs Status: Compliant

Preliminary
The state may be left by either of the following methods:
– Leave for the state “F3 power up” in case C/I = “TIM” code is received.
– Leave for state “F4 pending activation” in case C/I = AR8 or AR10 is received.
– Leave for the state “F6 synchronized” after INFO 2 has been recognized on the S/T-
– Leave for the state “F7 activated” after INFO 4 has been recognized on the S/T-
– Leave for any unconditional state if any unconditional C/I command is received.
As can be seen from the transition criteria, combinations of multiple conditions are
possible as well. A “ ” stands for a logical AND combination. And a “+” indicates a logical
OR combination.
The sections following the state diagram contain detailed information on all states and
signals used.
3.5.1
3.5.1.1
Figure 33
shows this for the unconditional transitions (Reset, Loop, Test Mode i).
Data Sheet
interface.
interface.
shows the state transition diagram of the SBCX-X state machine.
State Machine TE and LT-T mode
State Transition Diagram (TE, LT-T)
62
Description of Functional Blocks
PEB 3081
PEF 3081
2000-09-27
Figure 34