TMP92xy29FG Toshiba, TMP92xy29FG Datasheet - Page 488

• Manufacturer Part Number: TMP92xy29FG
• Manufacturer: Toshiba

Specifications of TMP92xy29FG

• Package: QFP176
• Rom Types(m=mask,p=otp, F=flash,e=eeprom): Romless
• Rom Combinations: Romless
• Ram Combinations: 144
• Architecture: 32-bit CISC
• Usb/spi Channels: 1/1
• Uart/sio Channels: 2
• I2c/sio Bus Channels: 1
• (s)dram Controller: 1
• Adc 10-bit Channel: 6
• Da Converter: -
• Timer 8-bit Channel: 8
• Timer 16-bit Channel: 2
• Pwm 8-bit Channels: -
• Pwm 16-bit Channels: -
• Cs/wait Controller: 4
• Dual Clock: Y
• Number Of I/o Ports: 98
• Power Supply Voltage(v): 3.0 to 3.6

3.18 SPI Controller (SPIC)
The SPIC is a Serial Peripheral Interface Controller that supports only master mode.
It can be connected to the SD card, MMC (Multi Media Card) etc. in SPI mode.
Its features are summarized as follows:
1) On-chip 32-byte FIFOs for both transmission and reception
2) Generates the CRC-7 and CRC-16 values for transmission and reception
3) Baud Rate: 20 Mbps (max)
4) Can be connected to multiple SD cards and the MMC. (Since there is only on chip select
5) Operates as the general synchronous SIO
6) Two types of interrupts: INTSPITX (Transmit interrupt), INTSPIRX (receive interrupt)
This device has 1 channel SPI circuit. It shared with PR0~PR3 pins. However, it is
possible also that it assign SPI function to PC4 ~PC6 pins.
Selects the followings: MSB/LSB-first, 8/16-bit data length, rising/falling edge
Select Read/Mask for interrupts: RFUL, TEMP, REND and TEND
signal preassigned as
connections.)
SPCS
92CF29A-486
, use other output ports to allow for more than two
TMP92CF29A
2009-06-11