AT91SAM7X256B-CU Atmel, AT91SAM7X256B-CU Datasheet - Page 118

• Manufacturer Part Number: AT91SAM7X256B-CU
• Description: IC MCU 256KB FLASH 100TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7X256B-CU

• Core Processor: ARM7
• Core Size: 16/32-Bit
• Speed: 55MHz
• Connectivity: CAN, Ethernet, I²C, SPI, SSC, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 62
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TFBGA
• Processor Series: 91S
• Core: ARM7TDMI
• Data Bus Width: 32 bit
• Data Ram Size: 64 KB
• Interface Type: CAN, Ethernet, SPI, I2S, TWI, USART, USB
• Maximum Clock Frequency: 55 MHz
• Number Of Programmable I/os: 62
• Number Of Timers: 3
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Temperature Range: - 40 C to + 85 C
• Package: 100TFBGA
• Device Core: ARM7TDMI
• Family Name: 91S
• Maximum Speed: 55 MHz
• On-chip Adc: 8-chx10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

19.3.3
Register Name:
Access Type:
Offset: (EFC0)
Offset: (EFC1)
• FRDY: Flash Ready Status
0: The EFC is busy and the application must wait before running a new command.
1: The EFC is ready to run a new command.
• LOCKE: Lock Error Status
0: No programming of at least one locked lock region has happened since the last read of MC_FSR.
1: Programming of at least one locked lock region has happened since the last read of MC_FSR.
• PROGE: Programming Error Status
0: No invalid commands and no bad keywords were written in the Flash Command Register MC_FCR.
1: An invalid command and/or a bad keyword was/were written in the Flash Command Register MC_FCR.
• SECURITY: Security Bit Status (Does not apply to EFC1 on the AT91SAM7X512.)
0: The security bit is inactive.
1: The security bit is active.
• GPNVMx: General-purpose NVM Bit Status (Does not apply to EFC1 on the AT91SAM7X512.)
0: The corresponding general-purpose NVM bit is inactive.
1: The corresponding general-purpose NVM bit is active.
• EFC LOCKSx: Lock Region x Lock Status
0: The corresponding lock region is not locked.
1: The corresponding lock region is locked.
118
LOCKS15
LOCKS7
31
23
15
–
7
–
AT91SAM7X512/256/128 Preliminary
MC Flash Status Register
LOCKS14
LOCKS6
30
22
14
MC_FSR
Read-only
0x68
0x78
–
6
–
LOCKS13
LOCKS5
29
21
13
–
5
–
SECURITY
LOCKS12
LOCKS4
28
20
12
–
4
LOCKS11
LOCKS3
PROGE
27
19
11
–
3
LOCKS10
GPNVM2
LOCKS2
LOCKE
26
18
10
2
GPNVM1
LOCKS9
LOCKS1
25
17
9
1
–
6120H–ATARM–17-Feb-09
GPNVM0
LOCKS8
LOCKS0
FRDY
24
16
8
0