HD6417750RF200DV Renesas Electronics America, HD6417750RF200DV Datasheet - Page 503

• Manufacturer Part Number: HD6417750RF200DV
• Description: MPU 1.5/3.3V 0K I-TEMP PB-FREE 2
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7750r

Specifications of HD6417750RF200DV

• Core Processor: SH-4
• Core Size: 32-Bit
• Speed: 200MHz
• Connectivity: EBI/EMI, FIFO, SCI, SmartCard
• Peripherals: DMA, POR, WDT
• Number Of I /o: 28
• Program Memory Type: ROMless
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.35 V ~ 1.6 V
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 208-QFP Exposed Pad, 208-eQFP, 208-HQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -

Bit 2—Refresh Count Overflow Flag (OVF): Status flag that indicates that the number of
refresh requests indicated by the refresh count register (RFCR) has exceeded the number specified
by the LMTS bit in RTCSR.
Bit 2: OVF
0
1
Note:
Bit 1—Refresh Count Overflow Interrupt Enable (OVIE): Controls generation or suppression
of an interrupt request when the OVF flag is set to 1 in RTCSR.
Bit 1: OVIE
0
1
Bit 0—Refresh Count Overflow Limit Select (LMTS): Specifies the count limit to be compared
with the refresh count indicated by the refresh count register (RFCR). If the RFCR register value
exceeds the value specified by LMTS, the OVF flag is set.
Bit 0: LMTS
0
1
*
If 1 is written, the original value is retained.
Description
RFCR has not overflowed the count limit indicated by LMTS
[Clearing condition]
When 0 is written to OVF
RFCR has overflowed the count limit indicated by LMTS
[Setting condition]
When RFCR overflows the count limit set by LMTS*
Description
Interrupt requests initiated by OVF are disabled
Interrupt requests initiated by OVF are enabled
Description
Count limit is 1024
Count limit is 512
Rev.7.00 Oct. 10, 2008 Page 417 of 1074
Section 13 Bus State Controller (BSC)
REJ09B0366-0700
(Initial value)
(Initial value)
(Initial value)