IP-10GETHERNET Altera, IP-10GETHERNET Datasheet - Page 17

• Manufacturer Part Number: IP-10GETHERNET
• Description: IP CORE - 10 Gbps Ethernet MAC PCS PMA Reference Design
• Manufacturer: Altera

Specifications of IP-10GETHERNET

• Software Application: IP CORE, Interface And Protocols, ETHERNET
• Supported Families: Quartus II
• Core Architecture: FPGA
• Core Sub-architecture: Stratix
• Rohs Compliant: NA
• Lead Free Status / RoHS Status: na

Chapter 2: Getting Started with the 10-Gbps Ethernet IP
Design Flows
© July 2010 Altera Corporation
Table 2–4. Avalon-ST Data Format Adapter Parameters (Part 2 of 2)
4. Click Finish to add this component to your system.
5. To complete this design, create the following connections:
6. Connectthespi_slave_to_avalon_mm_master_bridge_0avalon_masterAvalon
Figure 2–4. SOPC Builder Avalon-MM Master to Slave Connection
7. Repeat step
Table 2–5. SOPC Builder Connections
Figure 2–5. SOPC Builder System Connections
8. Click the System Generation tab.
9. If you want to simulate your SOPC builder system, select Simulate on the System
Error Signal Width (bits)
Ready Latency
Data Bits Per Symbol
eth_10ginst_0 out port
eth_10ginst_0 in port
master port to the eth_10ginst_0 s1 Avalon slave port using the following
procedure:
a. Click on the avalon_master port then hover in the Connections column to
b. Click on the open dot at the intersection of the eth_10ginst_0 s1 port and the
Figure 2–5
Generation tab to generate a functional simulation model for the system.
display possible connections.
spi_slave_to_avalon_mm_master_bridge_0 avalon_master to create a
connection.
Avalon-MM master
to slave connection
Make Connection From:
shows the completed system.
6
to make the connections listed in
Parameter
data_format_adapter_0 in port
data_format_adapter_0 out port
1
1
8
Table
Getting Started with the 10-Gbps Ethernet IP
2–5.
Value
To:
2–11