YR0K42378FC000BA Renesas Electronics America, YR0K42378FC000BA Datasheet - Page 777

• Manufacturer Part Number: YR0K42378FC000BA
• Description: KIT EVAL FOR H8S/2378
• Manufacturer: Renesas Electronics America
• Series: H8®r
• Type: MCUr

Specifications of YR0K42378FC000BA

• Contents: Board
• For Use With/related Products: H8S/2378
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Bit
2
1
0
Note:
Bit Name
TEND
MPB
MPBT
1. Only 0 can be written, to clear the flag. Alternately, use the bit clear instruction to clear
2. Elementary time unit (etu): Transfer duration for one bit
the flag.
Initial Value
1
0
0
R/W
R
R
R/W
Section 15 Serial Communication Interface (SCI, IrDA)
Description
Transmit End
This bit is set to 1 when no error signal has been
sent back from the receiving end and the next
transmit data is ready to be transferred to TDR.
[Setting conditions]
•
•
Timing to set this bit differs according to the
register settings.
GM = 0, BLK = 0: 2.5 etu *
GM = 0, BLK = 1: 1.5 etu *
GM = 1, BLK = 0: 1.0 etu *
GM = 1, BLK = 1: 1.0 etu *
•
•
Multiprocessor Bit
This bit is not used in Smart Card interface mode.
Multiprocessor Bit Transfer
Write 0 to this bit in Smart Card interface mode.
[Clearing conditions]
When the TE bit in SCR is 0 and the ERS bit is
also 0
If the ERS bit is 0 and the TDRE bit is 1 after
the specified interval after transmission of 1-
byte data
When 0 is written to TEND after reading TEND
= 1
When the DMAC or DTC is activated by a TXI
interrupt and writes data to TDR
Rev.7.00 Mar. 18, 2009 page 709 of 1136
2
2
2
2
after transmission
after transmission
after transmission
after transmission
REJ09B0109-0700