Z8F2480AN020SG Zilog, Z8F2480AN020SG Datasheet - Page 162

• Manufacturer Part Number: Z8F2480AN020SG
• Description: MCU 8BIT 24KB FLASH 44LQFP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F2480AN020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 37
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-LQFP
• Processor Series: Z8F248x
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 3
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4643 - KIT DEV Z8 ENCORE XP 28-PIN269-4630 - DEV KIT FOR Z8 ENCORE 8K/4K269-4629 - KIT DEV Z8 ENCORE XP 28-PIN269-4628 - KIT DEV Z8 ENCORE XP 8-PIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4676

PS025011-1010
LIN-UART Special Modes
MULTIPROCESSOR Mode
Figure 23. LIN-UART Asynchronous MULTIPROCESSOR Mode Data Format
The Driver Enable to
The special modes of the LIN-UART are:
•
•
The LIN-UART features a common control register (Control 0) that has a unique register
address and several mode-specific control registers (Multiprocessor Control, Noise Filter
Control, and LIN Control) that share a common register address (Control 1). When the
Control 1 address is read or written, the
Select and Status Register determines which physical register is accessed. Similarly, there
are mode-specific status registers, one of which is returned when the Status 0 Register is
read depending on the
The LIN-UART features a MULTIPROCESSOR (9-bit) mode that uses an extra (9
for selective communication when a number of processors share a common UART bus. In
MULTIPROCESSOR mode (also referred to as 9-bit mode), the multiprocessor bit (
transmitted immediately following the 8 bits of data and immediately preceding the
bit(s) as displayed in
In MULTIPROCESSOR (9-bit) mode, the Parity bit location (9
Multiprocessor control bit. The LIN-UART Control 1 and Status 1 registers provide MUL-
TIPROCESSOR (9-bit) mode control and status information. If an automatic address
matching scheme is enabled, the LIN-UART Address Compare register holds the network
address of the device.
Baud Rate (Hz)
MULTIPROCESSOR Mode
LIN Mode
1

Figure
START
MSEL
DE to Start Bit Set-up Time(s)
P R E L I M I N A R Y
23.
field.
bit set-up time is calculated as follows:
MSEL[2:0]

(Mode Select) field of the Mode
Z8 Encore! XP
Baud Rate (Hz)
th
2
Product Specification
bit) becomes the
®
F1680 Series
LIN-UART
th
MP
Stop
) bit
) is
148