Z8F2480AN020SG Zilog, Z8F2480AN020SG Datasheet - Page 325

• Manufacturer Part Number: Z8F2480AN020SG
• Description: MCU 8BIT 24KB FLASH 44LQFP
• Manufacturer: Zilog
• Series: Encore!® XP®r

Specifications of Z8F2480AN020SG

• Core Processor: Z8
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LED, LVD, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 37
• Program Memory Size: 24KB (24K x 8)
• Program Memory Type: FLASH
• Ram Size: 3K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 44-LQFP
• Processor Series: Z8F248x
• Core: eZ8
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 20 MHz
• Number Of Programmable I/os: 37
• Number Of Timers: 3
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• On-chip Adc: 10 bit, 8 Channel
• For Use With: 770-1002 - ISP 4PORT ZILOG Z8 ENCORE! MCU269-4643 - KIT DEV Z8 ENCORE XP 28-PIN269-4630 - DEV KIT FOR Z8 ENCORE 8K/4K269-4629 - KIT DEV Z8 ENCORE XP 28-PIN269-4628 - KIT DEV Z8 ENCORE XP 8-PIN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details
• Other names: 269-4676

Crystal Oscillator
Overview
Operating Modes
PS025011-1010
Note:
The products in the Z8 Encore! XP F1680 Series contain a main on-chip crystal oscillator
for use with external crystals with 1 MHz to 20 MHz frequencies, and a secondary 32 K
crystal oscillator. In addition, the external oscillator supports external 
RC networks with oscillation frequencies up to 4 MHz. 32 K secondary crystal oscillator
has no external RC oscillator mode. The on-chip crystal oscillator can be used to 
generate the primary system clock for the internal eZ8 CPU and the majority of the 
on-chip peripherals. And the secondary 32 K crystal oscillator can only be used to
generate clock for three timers.
Alternatively, the X
(for X
the X
products do not contain an internal clock divider. The frequency of the signal on the X
input pin determines the frequency of the system clock, and the frequency of the signal on
the X2
Although the X
generator, the CLKIN pin is better suited for such use (see
page 305).
The main on-chip crystal oscillator supports three oscillator modes:
•
•
•
The main on-chip crystal oscillator mode is selected using user-programmable Flash
Option Bits. For information, see
The secondary 32 K crystal oscillator supports two oscillator modes:
•
•
The secondary 32 K crystal oscillator mode is selected using user-programmable Flash
Option Bits. For information, see
Medium power for use with medium frequency crystals or ceramic resonators
(1 MHz to 8 MHz).
Maximum power for use with high frequency crystals (8 MHz to 20 MHz).
On-chip oscillator configured for use with external RC networks or external 
clock input (<4 MHz).
NORMAL mode for use with 32 K crystals (32 kHz).
On-chip oscillator configured for use with external clock input.
OUT
IN
IN
, 32 kHz–20 MHz; for X2
determines the frequency of timers.
or X2
IN
OUT
pin can be used as an main system clock input for an external clock
IN
pin must be left unconnected. The Z8 Encore! XP F1680 Series
and X2
P R E L I M I N A R Y
IN
input pin can also accept a CMOS-level clock input signal
IN
Flash Option Bits
Flash Option Bits
, below 4 MHz). If an external clock generator is used,
on page 267.
on page 267.
Z8 Encore! XP
System Clock Selection
Product Specification
®
Crystal Oscillator
F1680 Series
on
IN
311