AT91SAM9263B-CU Atmel, AT91SAM9263B-CU Datasheet - Page 349

• Manufacturer Part Number: AT91SAM9263B-CU
• Description: IC ARM9 MCU 200 MHZ 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9263B-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: CAN, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: 2-Wire, EBI, I2S, MCI, SPI, USART
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9263-EK
• Minimum Operating Temperature: - 40 C
• Package: 324TFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 200 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 160
• Ram Memory Size: 96KB
• Cpu Speed: 240MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• For Use With: AT91SAM9263-EK - KIT EVAL FOR AT91SAM9263AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3735625

28.3
28.4
6249H–ATARM–27-Jul-09
Processor Clock Controller
USB Clock Controller
Figure 28-1. Master Clock Controller
The PMC features a Processor Clock Controller (PCK) that implements the Processor Idle
Mode. The Processor Clock can be disabled by writing the System Clock Disable Register
(PMC_SCDR). The status of this clock (at least for debug purposes) can be read in the System
Clock Status Register (PMC_SCSR).
The Processor Clock PCK is enabled after a reset and is automatically re-enabled by any
enabled interrupt. The Processor Idle Mode is achieved by disabling the Processor Clock which
is automatically re-enabled by any enabled fast or normal interrupt, or by the reset of the prod-
uct. and entering Wait for Interrupt Mode. The Processor Clock is automatically re-enabled by
any enabled fast or normal interrupt, or by the reset of the product.
Note:
When the Processor Clock is disabled, the current instruction is finished before the clock is
stopped, but this does not prevent data transfers from other masters of the system bus.
The USB Source Clock is always generated from the PLL B output. If using the USB, the user
must program the PLL to generate a 48 MHz, a 96 MHz or a 192 MHz signal with an accuracy of
± 0.25% depending on the USBDIV bit in CKGR_PLLBR (see
When the PLL B output is stable, i.e., the LOCKB is set:
• The USB host clock can be enabled by setting the UHP bit in PMC_SCER. To save power on
• The USB device clock can be enabled by setting the UDP bit in PMC_SCER. To save power
this peripheral when it is not used, the user can set the UHP bit in PMC_SCDR. The UHP bit
in PMC_SCSR gives the activity of this clock. The USB host port require both the 12/48 MHz
signal and the Master Clock. The Master Clock may be controlled via the Master Clock
Controller.
on this peripheral when it is not used, the user can set the UDP bit in PMC_SCDR. The UDP
bit in PMC_SCSR gives the activity of this clock. The USB device port require both the 48
MHz signal and the Master Clock. The Master Clock may be controlled via the Master Clock
Controller.
MAINCK
PLLACK
PLLBCK
SLCK
The ARM Wait for Interrupt mode is entered with CP15 coprocessor operation. Refer to the Atmel
application note,
6217.
PMC_MCKR
CSS
Optimizing Power Consumption of AT91SAM9261-based
PMC_MCKR
Master Clock
Prescaler
PRES
PMC_MCKR
Master
Divider
MDIV
Clock
Figure
AT91SAM9263
28-2).
MCK
To the Processor
Clock Controller (PCK)
Systems, lit. number
349