AT91SAM9263B-CU Atmel, AT91SAM9263B-CU Datasheet - Page 962

• Manufacturer Part Number: AT91SAM9263B-CU
• Description: IC ARM9 MCU 200 MHZ 324-TFBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9263B-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 240MHz
• Connectivity: CAN, Ethernet, I²C, MMC, SPI, SSC, UART/USART, USB
• Peripherals: AC'97, LCD, POR, PWM, WDT
• Number Of I /o: 160
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: ROM
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 324-TFBGA
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 96 KB
• Interface Type: 2-Wire, EBI, I2S, MCI, SPI, USART
• Maximum Clock Frequency: 200 MHz
• Number Of Programmable I/os: 160
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9263-EK
• Minimum Operating Temperature: - 40 C
• Package: 324TFBGA
• Device Core: ARM926EJ-S
• Family Name: 91S
• Maximum Speed: 200 MHz
• Operating Supply Voltage: 1.8|2.5|3.3 V
• Controller Family/series: AT91SAM9xxx
• No. Of I/o's: 160
• Ram Memory Size: 96KB
• Cpu Speed: 240MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• For Use With: AT91SAM9263-EK - KIT EVAL FOR AT91SAM9263AT91SAM-ICE - EMULATOR FOR AT91 ARM7/ARM9
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: Q3735625

45.3.1.6
962
AT91SAM9263
Block Transfer
Figure 45-6. 2D Line Draw From (0,0) to (5,4) with Broken Pattern 0xEBBB
A rectangle (or square) shape in pixel units can be transferred between areas in the virtual mem-
ory area of the VRAM. Logical operations such as AND, OR, XOR, NOT, NOR, NAND and
XNOR can be made between the pixels in the source area and the destination area and stored
in the destination area.
The following registers need to be programmed to perform a block transfer:
• TDGC_BTSXR: size in pixel units on X-axis.
• TDGC_BTSYR: size in pixel units on Y-axis.
• TDGC_SBXR: starting position in pixel units on X-axis.
• TDGC_TEXR: ending position in pixel units on X-axis.
• TDGC_SBYR: starting position in pixel units on Y-axis.
• TDGC_TEYR: ending position in pixel units on Y-axis.
• TDGC_LOR: set LOC bitfield to select a logic operation
• TDGC_CSR: set CLR[3:0] bitfield to select a color.
• TDGC_GOR: set GOC bitfield and OP bitfields to select the following values.
MOV/AND/OR/XOR/NOT/NOR/NAND/XNOR.
– Set GOC to select block transfer.
– Set OP[1:0] to select no update X & Y.
– Set OP[2] to select absolute.
– Set OP[3] to select no transformation.
(0,0)
(0,7)
Y
0,0
1,0
Pixel not drawn
2,1
3,2
DISPLAY
4,3
X
5,4
6249H–ATARM–27-Jul-09
(9,0)
(9,7)