MMC2107CFCAG33 Freescale Semiconductor, MMC2107CFCAG33 Datasheet - Page 473

• Manufacturer Part Number: MMC2107CFCAG33
• Description: IC MCU 33MHZ 128K FLASH 144-LQFP
• Manufacturer: Freescale Semiconductor
• Series: MCorer

Specifications of MMC2107CFCAG33

• Core Processor: M210
• Core Size: 32-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 72
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-LQFP
• Processor Series: MMC2107
• Core: M-CORE
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SCI/SPI
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 72
• Number Of Timers: 2
• Operating Supply Voltage: 0 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 10-bit
• Cpu Family: Mcore
• Device Core: MCORE
• Device Core Size: 32b
• Frequency (max): 33MHz
• Total Internal Ram Size: 8KB
• # I/os (max): 72
• Number Of Timers - General Purpose: 2
• Operating Supply Voltage (typ): 3.3/5V
• Operating Supply Voltage (max): 3.6/5.5V
• Operating Supply Voltage (min): 2.7/4.5V
• Instruction Set Architecture: RISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

18.10.7.1 Software-Initiated Continuous-Scan Mode
MMC2107 – Rev. 2.0
MOTOROLA
When the software-initiated continuous-scan mode is programmed, the
trigger event is generated automatically by the QADC. Queue execution
begins immediately. If a pause is encountered, another trigger event is
generated internally, and then execution continues without pausing.
When the end-of-queue is reached, another internal trigger event is
generated and queue execution begins again from the beginning of the
queue.
While the time to internally generate and act on a trigger event is very
short, software can momentarily read the status conditions, indicating
that the queue is idle. The trigger overrun flag is never set while in the
software-initiated continuous-scan mode.
The software-initiated continuous-scan mode keeps the result registers
updated more frequently than any of the other queue operating modes.
The software can always read the result table to get the latest converted
value for each channel. The channels scanned are kept up to date by the
QADC without software involvement. Software can read a result value at
any time.
The software-initiated continuous-scan mode may be chosen for either
queue, but is normally used only with queue 2. When the
software-initiated continuous-scan mode is chosen for queue 1, that
queue operates continuously and queue 2, being lower in priority, never
gets executed. The short interval of time between a queue 1 completion
and the subsequent trigger event is not sufficient to allow queue 2
execution to begin.
The software-initiated continuous-scan mode is a useful choice with
queue 2 for converting channels that do not need to be synchronized to
anything, or for the slow-to-change analog channels. Interrupts are
normally not used with the software-initiated continuous-scan mode.
Rather, the software reads the latest conversion result from the result
table at any time. Once initiated, software action is not needed to sustain
conversions of channel.
Freescale Semiconductor, Inc.
For More Information On This Product,
Queued Analog-to-Digital Converter (QADC)
Go to: www.freescale.com
Queued Analog-to-Digital Converter (QADC)
Technical Data
Digital Control
473