UPD70F3735GC-GAD-AX Renesas Electronics America, UPD70F3735GC-GAD-AX Datasheet - Page 190

• Manufacturer Part Number: UPD70F3735GC-GAD-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3735GC-GAD-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 66
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JF3-L
R01UH0017EJ0400 Rev.4.00
Sep 30, 2010
(1) 16-bit counter
(2) CCR0 buffer register
(3) CCR1 buffer register
(4) Edge detector
(5) Output controller
(6) Selector
This 16-bit counter can count internal clocks or external events.
The count value of this counter can be read by using the TPnCNT register.
When the TPnCTL0.TPnCE bit = 0, the value of the 16-bit counter is FFFFH. If the TPnCNT register is read at this
time, 0000H is read.
Reset sets the TPnCE bit to 0. Therefore, the 16-bit counter is set to FFFFH.
This is a 16-bit compare register that compares the count value of the 16-bit counter.
When the TPnCCR0 register is used as a compare register, the value written to the TPnCCR0 register is
transferred to the CCR0 buffer register. When the count value of the 16-bit counter matches the value of the CCR0
buffer register, a compare match interrupt request signal (INTTPnCC0) is generated.
The CCR0 buffer register cannot be read or written directly.
The CCR0 buffer register is cleared to 0000H after reset, as the TPnCCR0 register is cleared to 0000H.
This is a 16-bit compare register that compares the count value of the 16-bit counter.
When the TPnCCR1 register is used as a compare register, the value written to the TPnCCR1 register is
transferred to the CCR1 buffer register. When the count value of the 16-bit counter matches the value of the CCR1
buffer register, a compare match interrupt request signal (INTTPnCC1) is generated.
The CCR1 buffer register cannot be read or written directly.
The CCR1 buffer register is cleared to 0000H after reset, as the TPnCCR1 register is cleared to 0000H.
This circuit detects the valid edges input to the TIPn0 and TIPn1 pins. No edge, rising edge, falling edge, or both
the rising and falling edges can be selected as the valid edge by using the TPnIOC1 and TPnIOC2 registers.
This circuit controls the output of the TOPn0 and TOPn1 pins. The output controller is controlled by the TPnIOC0
register.
This selector selects the count clock for the 16-bit counter. Eight types of internal clocks or an external event can
be selected as the count clock.
CHAPTER 7 16-BIT TIMER/EVENT COUNTER P (TMP)
Page 174 of 816