C509-L_97 SIEMENS [Siemens Semiconductor Group], C509-L_97 Datasheet - Page 91

• Manufacturer Part Number: C509-L_97
• Description: 8-Bit CMOS Microcontroller
• Manufacturer: SIEMENS [Siemens Semiconductor Group]

On-Chip Peripheral Components
C509-L
6.1.1.3.3
Hardware Power Down Mode
Figure 6-10 shows the port structure when the HWPD-pin becomes active (HWPD='0'). First of all
the SFRs are written with their reset values. Therefore, the bit PMOD is cleared (PMOD=0), quasi-
bidirectional port structure is enabled after leaving the hardware power down mode) and the port
latch and direction latch contain a '1' (QPL = '0', QDL='1'). Then the hardware power down mode
with ports in tri-state status is entered.
Figure 6-10
Bidirectional Port Structure - Hardware Power Down Mode
Due to HWPD='0' the FET n2 becomes active and the FETs p2 and p5 are switched off. The FETs
p1, p3 and n1 are switched off caused by the status of the port latch, direction latch and of PMOD
(reset values).
Semiconductor Group
6-13
1997-10-01