AT86RF212-ZU Atmel, AT86RF212-ZU Datasheet - Page 166

• Manufacturer Part Number: AT86RF212-ZU
• Description: IC TXRX ZIGBE/802.15.4/ISM 32QFN
• Manufacturer: Atmel

Specifications of AT86RF212-ZU

• Frequency: 700MHz, 800MHz, 900MHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4 Zigbee, 6LoWPAN, ISM
• Applications: ISM, ZigBee™
• Power - Output: 10dBm
• Sensitivity: -110dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 9.2mA
• Current - Transmitting: 25mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-VQFN Exposed Pad, 32-HVQFN, 32-SQFN, 32-DHVQFN
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 769 MHz to 935 MHz
• Interface Type: SPI
• Noise Figure: 7 dB
• Output Power: 21 dB
• Operating Supply Voltage: 1.8 V, 3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 25 mA
• Minimum Operating Temperature: - 40 C
• Modulation: OQPSK
• Protocol Supported: 802.15.4
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Appendix B – Errata
AT86RF212 Rev. A
166
AT86RF212
1. Power-on Reset
It can not be guaranteed that power-on reset (as described in section 5.1.2.1) is
working under all circumstances.
Problem Fix / Workaround
The following programming sequence should be executed after power-on to
completely reset the transceiver. Please note that the microcontroller can not count
on CLKM before finalization of step 5, refer to Table A-5.
Table A-5. Reset Procedure after Power-on
Step
1
2
3
4
5
6
Action
Power-on
Set the input pins to the
default operating values
Wait for at least 400 µs
Reset the transceiver
Set CLKM rate to 1 MHz
Force TRX_OFF
Register/Pin Access
Apply external supply voltage
SLP_TR = L
/RST = H
/SEL = H
/RST = L
for at least 625 ns (t
Register 0x03 = 0x19
Register 0x02 = 0x03
10
)
8168C-MCU Wireless-02/10
Description
Refer to section
5.1.2.1
Refer to section
5.1.4.1
Refer to section
5.1.4.5
Refer to section
7.7.6
Refer to section
5.1.5