DS3184DK Maxim Integrated Products, DS3184DK Datasheet - Page 225

• Manufacturer Part Number: DS3184DK
• Description: KIT DEMO FOR DS3184
• Manufacturer: Maxim Integrated Products

Specifications of DS3184DK

• Main Purpose: Telecom, ATM / Packet PHYs
• Utilized Ic / Part: DS3184
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Secondary Attributes: -
• Embedded: -
• Primary Attributes: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Register Name:
Register Description:
Register Address:
Bit #
Name
Bit #
Name
Bit 4: 8K Reference Activity Status Latched (8KREFL) This bit will be set when the 8 kHz reference signal on
the GPIO4 pin is active. The GL.CR2.G8KIS bit must be set for the activity to be monitored.
Bit 3: CLAD Reference Clock Activity Status Latched (CLADL) This bit will be set when the CLAD PLL
reference clock signal on the CLKA pin is active.
Bit 2: One Second Status Latched (ONESL) This bit will be set once a second. The GL.ISR.GSR status bit will
be set when this bit is set and the GL.SRIE.ONESIE bit is enabled. The INT pin will be driven low if this bit is set
and the GL.SRIE.ONESIE bit and the GL.ISRIE.GSRIE bit are enabled.
Bit 1: CLAD Loss Of Lock Latched (CLOLL) This bit will be set when the GL.SR.CLOL status bit changes from
low to high. The GL.ISR.GSR bit will be set when this bit is set and the GL.SRIE.CLOLIE bit is set and the INT pin
will be driven low if the GL.ISRIE.GSRIE bit is also enabled.
Bit 0: Global Performance Monitoring Update Status Latched (GPMSL) This bit will be set when the
GL.SR.GPMS status bit changes from low to high. This bit will set the GL.ISR.GSR status bit if the
GL.SRIE.GPMSIE is enabled. This bit will drive the interrupt pin low if the GL.SRIE.GPMSIE bit and the
GL.ISRIE.GSRIE bit are enabled.
Register Name:
Register Description:
Register Address:
Bit #
Name
Default
Bit #
Name
Default
Bit 2: One-Second Interrupt Enable (ONESIE) This bit will drive the interrupt pin low when this bit is enabled, the
GL.SRL.ONESL bit is set, and the GL.ISRIE.GSRIE bit is enabled.
Bit 1: CLAD Loss Of Lock Interrupt Enable (CLOLIE) The interrupt pin will be driven when this bit is enabled, the
GL.SRL.CLOLL is set, and GL.ISRIE.GSRIE bit is enabled.
Bit 0: Global Performance Monitoring Update Status Interrupt Enable (GPMSIE) The interrupt pin will be
driven when this bit is enabled and the GL.SRL.GPMSL bit is set and the GL.ISRIE.GSRIE bit is enabled.
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
0 = interrupt disabled
1 = interrupt enabled
15
15
—
—
—
—
7
0
7
0
14
14
—
—
—
—
6
0
6
0
GL.SRL
Global Status Register Latched
016h
GL.SRIE
Global Status Register Interrupt Enable
018h
13
13
—
—
—
—
5
0
5
0
8KREFL
12
12
—
—
—
0
0
4
4
225
CLADL
11
11
—
—
—
3
0
3
0
ONESIE
ONESL
10
10
—
—
2
0
2
0
CLOLIE
CLOLL
—
—
9
1
9
0
1
0
GPMSIE
GPMSL
—
—
8
0
8
0
0
0