PIC32MX440F512H-80I/PT Microchip Technology, PIC32MX440F512H-80I/PT Datasheet - Page 375

• Manufacturer Part Number: PIC32MX440F512H-80I/PT
• Description: IC PIC MCU FLASH 512K 64-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX440F512H-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 64-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 51
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

16.5
When the output compare module is enabled, the I/O
pin direction is controlled by the compare module. The
compare module returns the I/O pin control back to the
appropriate pin LAT and TRIS control bits when it is dis-
abled.
When the PWM with Fault Protection Input mode is
enabled, the OCFx Fault pin must be configured as an
input by setting the respective TRIS SFR bit.
OCFx Fault input pin is not automatically configured as
an input when PWM with Fault Input mode is selected.
TABLE 16-8:
© 2008 Microchip Technology Inc.
Legend: ST = Schmitt Trigger input with CMOS levels, I = Input, O = Output, A = Analog, D = Digital
Note 1:
Pin Name
OC1
OC2
OC3
OC4
OC5
OCFA
OCFB
2:
3:
4:
Output Compare Register I/O Pin
Control
All pins are subject to device pin priority control.
ON (OCxCON<15>) = 1. When the module is turned off, pins controlled by the module are released.
Mode select bits OCM<2:0> (CMxCON<2:0>).
Use of PWM Fault input is optional and is controlled by the OCM bits.
Control
Module
ON
ON
ON
ON
ON
ON
ON
PINS ASSOCIATED WITH OUTPUT COMPARE MODULES 1- 5
(2)
(2)
(2)
(2)
(2)
(2)
(2)
OCM<2:0>
OCM<2:0>
OCM<2:0>
OCM<2:0>
OCM<2:0>
OCM<2:0>
OCM<2:0>
Controlling
Bit Field
(1,3)
(1,3)
(1,3)
(1,3)
(1,3)
(1,3)
(1,3)
Required
TRIS bit
Setting
The
Preliminary
Input
Input
—
—
—
—
—
Type
D, O
D, O
D, O
D, O
D, O
Pin
D, I
D, I
Buffer
PIC32MX3XX/4XX
Type
ST
ST
—
—
—
—
—
Output Compare/PWM Channel 1
Output Compare/PWM Channel 2
Output Compare/PWM Channel 3
Output Compare/PWM Channel 4
Output Compare/PWM Channel 5
PWM Fault Protection A Input (For
Channels 1-3)
PWM Fault Protection B Input (For
Channels 4 -5)
Description
(4)
(4)
DS61143C-page 373