PIC32MX440F512H-80I/PT Microchip Technology, PIC32MX440F512H-80I/PT Datasheet - Page 521

• Manufacturer Part Number: PIC32MX440F512H-80I/PT
• Description: IC PIC MCU FLASH 512K 64-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 32MXr

Specifications of PIC32MX440F512H-80I/PT

• Program Memory Type: FLASH
• Program Memory Size: 512KB (512K x 8)
• Package / Case: 64-TFQFP
• Core Processor: MIPS32® M4K™
• Core Size: 32-Bit
• Speed: 80MHz
• Connectivity: I²C, IrDA, LIN, PMP, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 53
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC32MX4xx
• Core: MIPS
• Data Bus Width: 32 bit
• Data Ram Size: 32 KB
• Interface Type: I2C , SPI , UART
• Maximum Clock Frequency: 80 MHz
• Number Of Programmable I/os: 51
• Number Of Timers: 5 x 16 bit, 1 x 32 bit
• Operating Supply Voltage: 2.3 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM320003, DM320002, MA320002
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• Controller Family/series: PIC32
• No. Of I/o's: 51
• Ram Memory Size: 32KB
• Cpu Speed: 80MHz
• No. Of Timers: 5
• Embedded Interface Type: EUART, I2C, PSP, SPI
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC244003 - TEST BD MPLAB REAL ICE LOOPBACKDM320003 - BOARD DEMO USB PIC32 OTGAC244006 - KIT MPLAB REAL ICE TRACEAC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

23.5.1
The criteria for the device disabling the clock source in
SLEEP are: the oscillator type, peripherals using the
clock source, and (for select sources) the clock enable
bit.
• If the CPU clock source is POSC, it is turned off in
• If the CPU clock source is FRC, it is turned off in
• If the CPU clock source is SOSC, it will be turned
• If the CPU clock source is LPRC, it will be turned
TABLE 23-2:
© 2008 Microchip Technology Inc.
SLEEP. See Table 23-2 for applicable delays
when waking from SLEEP. The USB module can
override the disabling of the POSC or FRC. Refer
to the USB section for specific details.
SLEEP. See Table 23-2 for applicable delays
when waking from SLEEP. The USB module can
override the disabling of the POSC or FRC. Refer
to the USB section for specific details.
off if the SOSCEN bit is not set. See Table 23-2
for applicable delays when waking from SLEEP.
off if the clock source is not being used by a
peripheral that will be operating in SLEEP, such
as the WDT. See Table 23-2 for applicable delays
when waking from SLEEP.
Note:
OSCILLATOR SHUTDOWN IN
SLEEP MODE
Please refer to the “Electrical Specifica-
tions” section of the PIC18F1220/1320
device data sheet for T
T
LOCK
LP (OFF during Sleep)
LP (ON during Sleep)
DELAY TIMES FOR EXIT FROM SLEEP MODE
specification values.
Clock Source
XT, HS, XTL
EC, EXTRC
FRC, LPRC
EC + PLL
XT + PLL
POR
, T
FSCM
and
Preliminary
23.5.2
The processor will resume code execution and use the
same clock source that was active when SLEEP mode
was entered. The device is subject to a start-up delay if
a crystal oscillator and/or PLL is used as a clock source
when the device exits SLEEP.
23.5.3
The oscillator start-up and Fail-Safe Clock Monitor
delays (if enabled) associated with waking up from
SLEEP mode are shown in Table 23-2.
T
OST
Oscillator
T
Delay
T
T
LOCK
+ T
OST
OST
—
—
—
PIC32MX3XX/4XX
LOCK
CLOCK SELECTION ON WAKE-UP
FROM SLEEP
DELAY ON WAKE-UP FROM SLEEP
FSCM Delay
DS61143C-page 519
T
T
T
T
FSCM
FSCM
FSCM
FSCM
—
—
—