MCF5407AI220 Freescale Semiconductor, MCF5407AI220 Datasheet - Page 372

• Manufacturer Part Number: MCF5407AI220
• Description: IC MPU 32B 220MHZ COLDF 208-FQFP
• Manufacturer: Freescale Semiconductor
• Series: MCF540xr

Specifications of MCF5407AI220

• Core Processor: Coldfire V4
• Core Size: 32-Bit
• Speed: 220MHz
• Connectivity: EBI/EMI, I²C, UART/USART
• Peripherals: DMA, WDT
• Number Of I /o: 16
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 208-FQFP
• Maximum Clock Frequency: 220 MHz
• Operating Supply Voltage: 1.8 V, 3.3 V
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Program Memory Size: 24KB
• Cpu Speed: 220MHz
• Embedded Interface Type: I2C, UART
• Digital Ic Case Style: FQFP
• No. Of Pins: 208
• Supply Voltage Range: 3.3V
• Rohs Compliant: Yes
• For Use With: M5407C3 - KIT EVAL FOR MCF5407 W/ETHERNET
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Operation
When the receiver detects a high-to-low (mark-to-space) transition of the start bit on RxD,
the state of RxD is sampled each 16× clock for eight clocks, starting one-half clock after
the transition (asynchronous operation) or at the next rising edge of the bit time clock
(synchronous operation). If RxD is sampled high, the start bit is invalid and the search for
the valid start bit begins again.
If RxD is still low, a valid start bit is assumed and the receiver continues sampling the input
at one-bit time intervals, at the theoretical center of the bit, until the proper number of data
bits and parity, if any, is assembled and one stop bit is detected. Data on the RxD input is
sampled on the rising edge of the programmed clock source. The lsb is received first. The
data is then transferred to a receiver holding register and USRn[RxRDY] is set. If the
character is less than eight bits, the most significant unused bits in the receiver holding
register are cleared.
After the stop bit is detected, the receiver immediately looks for the next start bit. However,
if a non-zero character is received without a stop bit (framing error) and RxD remains low
for one-half of the bit period after the stop bit is sampled, the receiver operates as if a new
start bit were detected. Parity error, framing error, overrun error, and received break
conditions set the respective PE, FE, OE, RB error and break flags in the USRn at the
received character boundary and are valid only if USRn[RxRDY] is set.
If a break condition is detected (RxD is low for the entire character including the stop bit),
a character of all zeros is loaded into the receiver holding register (RHR) and
USRn[RB,RxRDY] are set. RxD must return to a high condition for at least one-half bit
time before a search for the next start bit begins.
USRn[RxRDY]
14-30
USRn[FFULL]
USRn[OE]
Receiver
Enabled
Overrun
internal
module
select
RTS
TxD
4
UOP0[RTS] = 1
Manually asserted first time,
automatically negated if overrun occurs
C1
Status
Data
(C1)
C2
Figure 14-34. Receiver Timing
MCF5407 User’s Manual
C3
C4
C5 will
be lost
C5
Status
(C2)
Data
C6
C6, C7, and C8 will be lost
Automatically asserted
when ready to receive
Status
(C3)
Data
Status
(C4)
Data
C7
command
Reset by
C8