HD6417011VX20V Renesas Electronics America, HD6417011VX20V Datasheet - Page 212

• Manufacturer Part Number: HD6417011VX20V
• Description: MPU 5V 0K 100-QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7010r

Specifications of HD6417011VX20V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, SCI
• Peripherals: POR, PWM
• Number Of I /o: 11
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Bit 2: TEND
0
1
Bit 1: MPB
0
1
Bit 0: MPBT
0
1
202
Bit 2—Transmit End (TEND): Indicates that when the last bit of a serial character was
transmitted, the TDR did not contain valid data, so transmission has ended. TEND is a read-
only bit and cannot be written.
Bit 1—Multiprocessor Bit (MPB): Stores the value of the multiprocessor bit in receive data
when a multiprocessor format is selected for receiving. The MPB is a read-only bit and cannot
be written.
Bit 0—Multiprocessor Bit Transfer (MPBT): Stores the value of the multiprocessor bit added
to transmit data when a multiprocessor format is selected for transmitting.
Description
Transmission is in progress
TEND is cleared to 0 when software reads TDRE after it has been set to 1, then
writes 0 in TDRE
End of transmission (initial value)
TEND is set to 1 when the chip is power-on reset, TE is cleared to 0 in the serial
control register (SCR), or TDRE is 1 when the last bit of a one-byte serial
character is transmitted.
Description
Multiprocessor bit value in receive data is 0 (initial value). If RE is cleared to 0
when a multiprocessor format is selected, the MPB retains its previous value.
Multiprocessor bit value in receive data is 1
Description
Multiprocessor bit value in transmit data is 0 (initial value)
Multiprocessor bit value in transmit data is 1