HD6417032F20V Renesas Electronics America, HD6417032F20V Datasheet - Page 198

• Manufacturer Part Number: HD6417032F20V
• Description: SH1 ROMLESS LEAD FREE
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7030r

Specifications of HD6417032F20V

• Core Processor: SH-1
• Core Size: 32-Bit
• Speed: 20MHz
• Connectivity: EBI/EMI, SCI
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 32
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 112-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -

Section 8 Bus State Controller (BSC)
8.10.1
If there is conflict between bus arbitration and refreshing, the operation is as follows.
1. If DRAM refreshing is requested in this chip when the bus is released and BACK is low,
2. When BREQ changes from high to low and an internal refresh is requested at the timing of bus
Rev. 7.00 Jan 31, 2006 page 170 of 658
REJ09B0272-0700
BREQ
BACK
BACK goes high and the occurrence of the refresh request can be indicated externally. At this
time, the external device may generate a bus cycle when BREQ is low even if BACK is high.
Therefore, the bus remains released to the external device. Then, when BREQ goes high, this
chip acquires bus ownership, and executes a refresh and the bus cycle of the CPU or DMAC.
After the external device acquires bus ownership and BACK is low, a refresh is requested
when BACK goes high even if BREQ input is low. Therefore, drive BREQ high immediately
to release the bus for this chip to hold DRAM data (see figure 8.36).
release by this chip, BACK may remain high. The bus is released to the external device since
BREQ input is low. This operation is based on the above specification (1). To hold DRAM
data, drive BREQ high and release the bus to this chip immediately when the external device
detects that BACK does not change to low during a fixed time (see figure 8.37). When a
refresh request is generated and BACK returns to high, as shown in figure 8.37, a momentary
narrow pulse-shaped spike may be output where BACK was originally supposed to go low.
Operation of Bus Arbitration
Figure 8.36 BACK
BACK Operation in Response to Refresh Demand (1)
BACK
BACK
Refresh demand
Refresh execution