MCIMX53-START Freescale Semiconductor, MCIMX53-START Datasheet - Page 25

KIT DEVELOPMENT I.MX53

MCIMX53-START

Manufacturer Part Number
MCIMX53-START
Description
KIT DEVELOPMENT I.MX53
Manufacturer
Freescale Semiconductor
Series
i.MX53r
Type
MCUr
Datasheets

Specifications of MCIMX53-START

Contents
Board
Silicon Manufacturer
Freescale
Core Architecture
ARM
Core Sub-architecture
Cortex - A8
Silicon Core Number
I.MX5
Silicon Family Name
I.MX53
Peak Reflow Compatible (260 C)
Yes
Rohs Compliant
Yes
Leaded Process Compatible
Yes
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
i.MX53
Lead Free Status / Rohs Status
Supplier Unconfirmed

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
MCIMX53-START
Manufacturer:
ST
0
Part Number:
MCIMX53-START-R
Manufacturer:
ST
0
Freescale Semiconductor
• VDD_REG supply is required to be powered ON to enable DDR operation. It must be powered
• NVCC_EIM_DRAM_2P5 PoP additional power line timing is the same as DVV_REG
• VDDA and VDDAL1 can be powered ON anytime before POR_B, regardless of any other
• VDDGP can be powered ON anytime before POR_B, regardless of any other power signal.
• VP and VPH can be powered up together, or anytime after, the VCC. VP and VPH should come
• TVDAC_DHVDD and TVDAC_AHVDDRGB should be powered from the same regulator.
internal regulators power source.
If VDD_DIG_PLL and VDD_ANA_PLL are powered on externally, to reduce current leakage
during the power-up, it is recommended to activate the VDD_REG before or at the same time
with VDD_DIG_PLL and VDD_ANA_PLL. If this sequencing is not possible, make sure that
the 2.5 V VDD_REG supply shut-off output impedance is higher than 1 kΩ when it is inactive.
on after VCC and before NVCC_EMI_DRAM. The sequence should be:
power signal.
before POR.
This is due to ESD diode protection circuit, that may cause current leakage if one of the supplies
is powered ON before the other.
The POR_B input must be immediately asserted at power-up and remain
asserted until after the last power rail reaches its working voltage.
i.MX53xD Applications Processors for Consumer Products, Rev. 1
VCC →VDD_REG →NVCC_EMI_DRAM
NOTE
Electrical Characteristics
25

Related parts for MCIMX53-START