MCIMX535DVV1C Freescale Semiconductor, MCIMX535DVV1C Datasheet - Page 53

• Manufacturer Part Number: MCIMX535DVV1C
• Description: IMX53 REV 2.1 COMM
• Manufacturer: Freescale Semiconductor

Specifications of MCIMX535DVV1C

• Rohs Compliant: YES
• Core Size: 32bit
• Program Memory Size: 288KB
• Cpu Speed: 1GHz
• Digital Ic Case Style: BGA
• No. Of Pins: 529
• Supply Voltage Range: 1.25V To 1.35V
• Operating Temperature Range: -20°C To +85°C
• Msl: MSL 3 - 168 Hours
• Embedded Interface Type: I2C, SPI, UART
• Lead Free Status / Rohs Status: Supplier Unconfirmed

4.6.6
The following subsections provide information on the EIM.
4.6.6.1
Table 37
the Reference Manual which are identical to those mentioned in this data sheet.
4.6.6.2
EIM supports16-bit and 8-bit devices operating in address/data separate or multiplexed modes. In some
of the modes the EIM and the NAND FLASH have shared data bus.
pads allocation in different modes.
Freescale Semiconductor
4
5
NF17 is defined only in asymmetric operation mode.
NF17 max value is equivalent to max t
T
NF18 is defined only in Symmetric operation mode.
t
where t
EXTMC including I/O pad delay.
NF18 max value is equivalent to max t
T
aclk
DHR
aclk
EIM Chapter Nomenclature
is “emi_slow_clk” of the system.
is “emi_slow_clk” of the system.
(MIN) is calculated by the following formula:
Reference Manual
is a guide intended to help the user identify signals in the External Interface Module Chapter of
REpd
ADDR/M_DATA
External Interface Module (EIM)
EIM Signal Cross Reference
EIM Interface Pads Allocation
WAIT_B
is RE propogation delay in the chip including I/O pad delay, and t
BEy_B
WE_B
ADDR
OE_B
BCLK
DATA
ADV
CSx
i.MX53xD Applications Processors for Consumer Products, Rev. 3
EIM_BCLK
EIM_CSx
EIM_RW
EIM_OE
EIM_EBx
EIM_LBA
EIM_A[25:16], EIM_DA[15:0]
EIM_DAx (Addr/Data muxed mode)
EIM_NFC_D (Data bus shared with NAND Flash)
EIM_Dx (dedicated data bus)
EIM_WAIT
Table 37. EIM Signal Cross Reference
RHZ
RHZ
value that can be used with NFC.
value that can be used with NFC.
Reference Manual External Signals and Pin Multiplexing Chapter,
and IOMUXC Controller Chapter Nomenclature
Tdl
2
– (t
REpd
Data Sheet Nomenclature,
+ t
Dpd
)
Dpd
Table 38
is Data propogation delay from I/O pad to
provides EIM interface
Electrical Characteristics
53