EP1S30F780I6N Altera, EP1S30F780I6N Datasheet - Page 104
Manufacturer Part Number
IC STRATIX FPGA 30K LE 780-FBGA
Specifications of EP1S30F780I6N
Number Of Logic Elements/cells
Number Of Labs/clbs
Total Ram Bits
Number Of I /o
Voltage - Supply
1.425 V ~ 1.575 V
-40°C ~ 100°C
Package / Case
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Number Of Gates
PLLs & Clock Networks
Stratix Device Handbook, Volume 1
During switchover, the PLL VCO continues to run and will either slow
down or speed up, generating frequency drift on the PLL outputs. The
clock switchover transitions without any glitches. After the switch, there
is a finite resynchronization period to lock onto new clock as the VCO
ramps up. The exact amount of time it takes for the PLL to relock relates
to the PLL configuration and may be adjusted by using the
programmable bandwidth feature of the PLL. The specification for the
maximum time to relock is 100 µs.
For more information on clock switchover, see AN 313, Implementing
Clock Switchover in Stratix & Stratix GX Devices.
The PLL reconfiguration feature enables system logic to change Stratix
device enhanced PLL counters and delay elements without reloading a
Programmer Object File (.pof). This provides considerable flexibility for
frequency synthesis, allowing real-time PLL frequency and output clock
delay variation. You can sweep the PLL output frequencies and clock
delay in prototype environments. The PLL reconfiguration feature can
also dynamically or intelligently control system clock speeds or t
delays in end systems.
Clock delay elements at each PLL output port implement variable delay.
for the counters and the clock delay elements. The configuration time is
less than 20 μs for the enhanced PLL using a input shift clock rate of
22 MHz. The charge pump, loop filter components, and phase shifting
using VCO phase taps cannot be dynamically adjusted.
shows a diagram of the overall dynamic PLL control feature