CY8CTST200-24LQXI Cypress Semiconductor Corp, CY8CTST200-24LQXI Datasheet - Page 100

• Manufacturer Part Number: CY8CTST200-24LQXI
• Description: IC MCU 32K FLASH 24UQFN
• Manufacturer: Cypress Semiconductor Corp
• Series: TrueTouch™r

Specifications of CY8CTST200-24LQXI

• Program Memory Type: FLASH (32 kB)
• Package / Case: 24-WQFN Exposed Pad, 24-HWQFN
• Applications: Touchscreen Controller
• Core Processor: M8C
• Controller Series: CY8CT
• Ram Size: 2K x 8
• Interface: I²C, SPI, UART/USART, USB
• Number Of I /o: 20
• Voltage - Supply: 1.8 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Processor Series: CY8CTxx2xx
• Core: M8C
• Data Bus Width: 8 bit
• Data Ram Size: 2 KB
• Interface Type: I2C, SPI
• Maximum Clock Frequency: 24 MHz
• Number Of Timers: 3
• Operating Supply Voltage: 1.71 V to 5.5 V
• Mounting Style: SMD/SMT
• Program Memory Size: 32 KB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 770-1000 - ISP 4PORT FOR CYPRESS PSOC MCU
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 428-2956

12.2
The following registers are only associated with the Analog Bus Mux in the CY8CTMG20x and CY8CTST200 PSoC devices
and are listed in address order. Each register description has an associated register table showing the bit structure for that
register. Register bits that are grayed out throughout this document are reserved bits and are not detailed in the register
descriptions that follow. Always write reserved bits with a value of ‘0’.
12.2.1
The Analog Mux Port Bit Enable Registers (MUX_CR0,
MUX_CR1, MUX_CR2, MUX_CR3, and MUX_CR4) control
the connection between the analog mux bus and the corre-
sponding pin.
Bits 7 to 0: ENABLE[7:0]. The bits in these registers
enable connection of individual pins to the analog mux bus.
Each I/O port has a corresponding MUX_CRx register.
I/O Analog Multiplexer
100
1,D8h
1,D9h
1,DAh
1,DBh
1,DFh
Address
MUX_CR0
MUX_CR1
MUX_CR2
MUX_CR3
MUX_CR4
Register Definitions
MUX_CRx Registers
Name
Bit 7
Bit 6
PSoC CY8CTMG20x and CY8CTST200 TRM, Document No. 001-53603 Rev. *C
Bit 5
Bit 4
ENABLE[7:0]
ENABLE[7:0]
ENABLE[7:0]
ENABLE[7:0]
Setting a bit high connects the corresponding pin to the
analog bus.
For additional information, refer to the
page
271.
Bit 3
Bit 2
ENABLE[3:0]
Bit 1
MUX_CRx register on
Bit 0
RW : 00
RW : 00
RW : 00
RW : 00
Access
RW : 0
[+] Feedback