MC68340AG16E Freescale Semiconductor, MC68340AG16E Datasheet - Page 126

• Manufacturer Part Number: MC68340AG16E
• Description: IC MPU 32BIT 16MHZ 144-LQFP
• Manufacturer: Freescale Semiconductor

Specifications of MC68340AG16E

• Processor Type: M683xx 32-Bit
• Speed: 16MHz
• Voltage: 5V
• Mounting Type: Surface Mount
• Package / Case: 144-LQFP
• Controller Family/series: 68K
• Core Size: 32 Bit
• No. Of I/o's: 16
• Cpu Speed: 16MHz
• No. Of Timers: 2
• Embedded Interface Type: UART
• Digital Ic Case Style: LQFP
• Rohs Compliant: Yes
• Processor Series: M683xx
• Core: CPU32
• Maximum Clock Frequency: 16 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Details

SLIMP—Limp Mode
SLOCK—Synthesizer Lock
RSTEN—Reset Enable
STSIM—Stop Mode System Integration Clock
STEXT—Stop Mode External Clock
4.3.4 Chip Select Registers
The following paragraphs provide descriptions of the registers in the chip select function,
and an example of how to program the registers. The chip select registers cannot be used
until the V-bit in the MBAR is set.
MOTOROLA
1 = A loss of input signal reference has been detected, and the VCO is running at
0 = External input signal frequency is at VCO reference.
1 = VCO has locked onto the desired frequency (or system clock is driven
0 = VCO is enabled, but has not yet locked.
1 = Loss of input signal causes a system reset.
0 = Loss of input signal causes the VCO to operate at a nominal speed without
1 = When LPSTOP is executed, the SIM40 clock is driven from the VCO.
0 = When LPSTOP is executed, the SIM40 clock is driven from an external crystal or
1 = When the LPSTOP instruction is executed, the external clock pin (CLKOUT) is
0 = When the LPSTOP instruction is executed, the external clock (CLKOUT) is held
approximately one-half the maximum speed (affected by the X-bit ), determined
from an internal voltage reference.
externally).
external reference (limp mode), and the device continues to operate at that
speed.
oscillator, and the VCO is turned off to conserve power.
driven from the SIM40 clock as determined by the STSIM bit.
low to conserve power. No external clock will be driven in LPSTOP mode.
Freescale Semiconductor, Inc.
For More Information On This Product,
MC68340 USER’S MANUAL
Go to: www.freescale.com
4- 29