UPD784026 Renesas Electronics Corporation., UPD784026 Datasheet - Page 142

• Manufacturer Part Number: UPD784026
• Description: 16/8-bit Single-chip Microcontrollers
• Manufacturer: Renesas Electronics Corporation.

(2) When set as an input port
102
Caution A bit manipulation instruction manipulates one bit as the result, but accesses the port in 8-bit units.
The port pin level can be loaded into an accumulator by means of a transfer instruction, etc. In this case, too, writes can
be performed to the output latch, and data transferred from the accumulator by a transfer instruction, etc., is stored in all
output latches irrespective of the port input/output specification. However, since the output buffer of a bit specified as an
input port is high-impedance, the data is not output to the port pin (when a bit specified as input is switched to an output
port, the output latch contents are output to the port pin). Also, the contents of the output latch of a bit specified as an input
port cannot be loaded into an accumulator.
Therefore, if a bit manipulation instruction is used on a port that has the I/O mode or port mode and control
mode, the contents of the output latch of the pin set in the input mode or control mode become undefined
(excluding bits manipulated with a SET1 or CLR1 instruction, etc.). Particular care is required when there
are bits which are switched between input and output.
Caution is also required when manipulating the port with other 8-bit manipulation instructions.
Internal
Bus
Figure 5-17 Port Specified as Input Port
WR
RD
CHAPTER 5 PORT FUNCTIONS
PORT
IN
Output
Latch
P1n
n = 0-7