HD6417616 RENESAS [Renesas Technology Corp], HD6417616 Datasheet - Page 141

• Manufacturer Part Number: HD6417616
• Description: 32-Bit RISC Microcomputer SuperH™ RISC engine Family/SH7600 Series
• Manufacturer: RENESAS [Renesas Technology Corp]

Bit 7—PLL2ST: Switching is possible in modes 0 to 3. In modes 4 to 6, PLL circuit 2 cannot be
used. In these modes, this bit always reads 1.
Bit 7: PLL2ST
0
1
Bit 6—PLL1ST: Switching is possible in modes 0, 1, 4, and 5. In modes 2, 3, and 6, PLL circuit 1
cannot be used. In these modes, this bit always reads 1.
Bit 6: PLL1ST
0
1
Bit 5—CKIOST: Setting is possible in modes 0 to 3. In modes 4 to 6, the CKIO pin is an input
pin. In these modes, this bit always reads 1.
Bit 5: CKIOST
0
1
Bit 4—Reserved: This bit is always read as 0. The write value should always be 0.
Bits 3 to 0—FR3 to FR0: The internal clock frequency and CKIO output frequency (modes 0–2)
can be set by frequency setting bits FR3–FR0. The values that can be set in bits FR3–FR0 depend
on the mode and whether PLL circuit 1 and PLL circuit 2 are operating or halted. The following
tables show the values that can be set in FR3–FR0, and the internal clock and CKIO output
frequency ratios, taking the external input clock frequency as 1.
Initial value:
R/W:
Bit:
PLL2ST
R/W
—
7
PLL circuit 2 used
PLL circuit 2 not used
PLL circuit 1 is used
PLL circuit 1 is not used
The CKIO pin outputs E
The CKIO pin is in the high-impedance state (Do not place CKIO in the high-
impedance state when PLL circuit 1 is operating)
Description
Description
Description
PLL1ST
R/W
—
6
CKIOST
R/W
—
5
Section 3 Oscillator Circuits and Operating Modes
—
R
4
0
Rev. 2.00 Mar 09, 2006 page 115 of 906
R/W
FR3
3
0
R/W
FR2
—
2
REJ09B0292-0200
R/W
FR1
—
1
FR0
R/W
0
0