HD6432160 RENESAS [Renesas Technology Corp], HD6432160 Datasheet - Page 484

• Manufacturer Part Number: HD6432160
• Description: Hitachi 16-Bit Single-Chip Microcomputer
• Manufacturer: RENESAS [Renesas Technology Corp]

16.4.6
If the slave address matches to the address in the first frame (address reception frame) following
the start condition detection when the 8th bit data (R/:) is 1 (read), the TRS bit in ICCR is
automatically set to 1 and the mode changes to slave transmit mode.
Figure 16.24 shows the sample flowchart for the operations in slave transmit mode.
Rev. 2.0, 08/02, page 444 of 788
No
Slave Transmit Operation
Write transmit data in ICDR
No
No
Clear ACKE to 0 in ICCR
Set TRS = 0 in ICCR
Read ACKB in ICSR
Slave transmit mode
Clear IRIC in ICCR
Clear IRIC in ICCR
Clear IRIC in ICCR
Read IRIC in ICCR
Clear IRIC in ICCR
Read IRIC in ICCR
(ACKB=0 clear)
of transmission
(ACKB = 1)?
Read ICDR
IRIC = 1?
IRIC = 1?
Figure 16.24 Sample Flowchart for Slave Transmit Mode
End
End
Yes
Yes
Yes
[3], [4] Wait for 1 byte to be transmitted.
[6] Read IRIC in ICCR
[7] Clear acknowledge bit data
[1], [2] If the slave address matches to the address in the first frame
[8] Set slave receive mode.
[9] Dummy read (to release the SCL line).
[10] Wait for stop condition
[3], [5] Set transmit data for the second and subsequent bytes.
[4] Determine end of transfer.
following the start condition detection and the R/
in slave recieve mode, the mode changes to slave transmit mode.
bit is 1