C8051F320DK Silicon Laboratories Inc, C8051F320DK Datasheet - Page 109

• Manufacturer Part Number: C8051F320DK
• Description: DEV KIT FOR C8051F320/F321
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F320DK

• Contents: Evaluation Board, Power Supply, USB Cables, Adapter and Documentation
• Processor To Be Evaluated: C8051F320/F321
• Interface Type: USB
• Silicon Manufacturer: Silicon Labs
• Core Architecture: 8051
• Silicon Core Number: C8051F320
• Silicon Family Name: C8051F32x
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: Silicon Laboratories C8051F320, C8051F321
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1260

The level of Flash security depends on the Flash access method. The three Flash access methods that
can be restricted are reads, writes, and erases from the C2 debug interface, user firmware executing on
unlocked pages, and user firmware executing on locked pages. Table 11.2 summarizes the Flash security
features of the 'F320/1 devices.
Read, Write or Erase unlocked pages
(except page with Lock Byte)
Read, Write or Erase locked pages
(except page with Lock Byte)
Read or Write page containing Lock Byte
(if no pages are locked)
Read or Write page containing Lock Byte
(if any page is locked)
Read contents of Lock Byte
(if no pages are locked)
Read contents of Lock Byte
(if any page is locked)
Erase page containing Lock Byte
(if no pages are locked)
Erase page containing Lock Byte - Unlock all pages
(if any page is locked)
Lock additional pages
(change '1's to '0's in the Lock Byte)
Unlock individual pages
(change '0's to '1's in the Lock Byte)
Read, Write or Erase Reserved Area

C2DE - C2 Device Erase (Erases all Flash pages including the page containing the Lock Byte)
FEDR - Not permitted; Causes Flash Error Device Reset (FERROR bit in RSTSRC is '1' after reset)
- All prohibited operations that are performed via the C2 interface are ignored (do not cause device reset).
- Locking any Flash page also locks the page containing the Lock Byte.
- Once written to, the Lock Byte cannot be modified except by performing a C2 Device Erase.
- If user code writes to the Lock Byte, the Lock does not take effect until the next device reset.
Action
Table 11.2. Flash Security Summary
Rev. 1.4
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Not Permitted
Only C2DE
C2 Debug
Permitted
Permitted
Permitted
Permitted
Interface
an unlocked page a locked page
User Firmware executing from:
Permitted
Permitted
Permitted
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
FEDR
C8051F320/1
Permitted
Permitted
Permitted
Permitted
Permitted
Permitted
FEDR
FEDR
FEDR
FEDR
FEDR
109