MC912DG128ACPV Freescale Semiconductor, MC912DG128ACPV Datasheet - Page 109

• Manufacturer Part Number: MC912DG128ACPV
• Description: IC MCU 128K FLASH 8MHZ 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HC12r

Specifications of MC912DG128ACPV

• Core Processor: CPU12
• Core Size: 16-Bit
• Speed: 8MHz
• Connectivity: CAN, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x8/10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

MC68HC912DT128A — Rev 4.0
MOTOROLA
NDBE — No Data Bus Enable
CGMTE — Clock Generator Module Testing Enable
PIPOE — Pipe Status Signal Output Enable
NECLK — No External E Clock
In peripheral mode, the PEAR register is not accessible for reads or
writes. However, the CGMTE control bit is reset to one to configure
PE6 as a test output for the CGM module.
Normal: write once; Special: write anytime EXCEPT the first. Read
anytime.
The NDBE bit has no effect in Single Chip or Peripheral Modes and
PE7 is defaulted to the CAL function if CALE bit is set in PEAR
register or to an I/O otherwise.
Normal: write never; Special: write anytime EXCEPT the first time.
Read anytime.
Normal: write once; Special: write anytime EXCEPT the first time.
Read anytime.
Normal single chip: write once; special single chip: write anytime; all
other modes: write never.
Read anytime. In peripheral mode, E is an input and in all other
modes, E is an output.
Freescale Semiconductor, Inc.
For More Information On This Product,
0 = PE7 is used for DBE, external control of data enable on
1 = PE7 is CAL function if CALE bit is set in PEAR register or
0 = PE6 is general-purpose I/O or pipe output.
1 = PE6 is a test signal output from the CGM module (no effect in
0 = PE[6:5] are general-purpose I/O (if CGMTE = 1, PE6 is a test
1 = PE[6:5] are outputs and indicate the state of the instruction
memories, or inverted E clock.
general-purpose I/O otherwise.
single chip or normal expanded modes). PIPOE = 1 overrides
this function and forces PE6 to be a pipe status output signal.
output signal from the CGM module).
queue (only effective in expanded modes).
Bus Control and Input/Output
Go to: www.freescale.com
Bus Control and Input/Output
Technical Data
Registers
109