MC9S12E128CFU Freescale Semiconductor, MC9S12E128CFU Datasheet - Page 163

• Manufacturer Part Number: MC9S12E128CFU
• Description: IC MCU 128K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E128CFU

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 16 bit
• Operating Supply Voltage: 3.135 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• On-chip Dac: 8 bit, 2 Channel
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

3.6
3.6.1
Port AD generates an edge sensitive interrupt if enabled. It offers sixteen I/O pins with edge triggered
interrupt capability in wired-or fashion. The interrupt enable as well as the sensitivity to rising or falling
edges can be individually configured on per pin basis. All eight bits/pins share the same interrupt vector.
Interrupts can be used with the pins configured as inputs (with the corresponding ATDDIEN1 bit set to 1)
or outputs.
An interrupt is generated when a bit in the port interrupt flag register and its corresponding port interrupt
enable bit are both set. This external interrupt feature is capable to wake up the CPU when it is in stop or
wait mode.
A digital filter on each pin prevents pulses
interrupt. The minimum time varies over process conditions, temperature and voltage
Table
Freescale Semiconductor
3-38).
Interrupts
General
Glitch, filtered out, no interrupt flag set
Valid pulse, interrupt flag set
1
These values include the spread of the oscillator frequency over temperature,
voltage and process.
Uncertain
Ignored
Pulse
Valid
Figure 3-51. Interrupt Glitch Filter on Port AD (PPS = 0)
t
Table 3-38. Pulse Detection Criteria
ifmin
3 < t
t
t
MC9S12E128 Data Sheet, Rev. 1.07
pulse
pulse
pulse
t
ifmax
<= 3
>= 4
(Figure
< 4
STOP
3-52) shorter than a specified time from generating an
Bus Clock
Bus Clock
Bus Clock
Unit
Mode
3.2 < t
t
Chapter 3 Port Integration Module (PIM9E128V1)
pulse
t
pulse
pulse
<= 3.2
>= 10
STOP
< 10
1
Unit
s
s
s
(Figure 3-51
and
163