MC9S12E128CFU Freescale Semiconductor, MC9S12E128CFU Datasheet - Page 564

• Manufacturer Part Number: MC9S12E128CFU
• Description: IC MCU 128K FLASH 25MHZ 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12E128CFU

• Core Processor: HCS12
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SCI, SPI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 60
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2.35 V ~ 2.75 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-QFP
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: SCI, SPI
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 60
• Number Of Timers: 16 bit
• Operating Supply Voltage: 3.135 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit
• On-chip Dac: 8 bit, 2 Channel
• For Use With: M68EVB912E128 - BOARD EVAL FOR MC9S12E128/64
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No RoHS Version Available

Appendix A Electrical Characteristics
A.1.3
There are four groups of functional pins.
A.1.3.1
Those I/O pins have a nominal level of 3.3V or 5V depending on the application operating point. This
group of pins is comprised of all port I/O pins, the analog inputs, BKGD pin and the RESET inputs.The
internal structure of all those pins is identical, however some of the functionality may be disabled.
A.1.3.2
This group of pins is comprised of the VRH and VRL pins.
A.1.3.3
The pins XFC, EXTAL, XTAL dedicated to the oscillator have a nominal 2.5V level. They are supplied by
VDDPLL.
A.1.3.4
This pin is used for production testing only.
A.1.4
Power supply must maintain regulation within operating V
operating maximum current conditions. If positive injection current (V
564
VDD1, VSS1, VDD2 and VSS2 are the supply pins for the internal logic.
VDDPLL, VSSPLL supply the oscillator and the PLL.
VSS1 and VSS2 are internally connected by metal.
VDD1 and VDD2 are internally connected by metal.
VDDA, VDDX, VDDR as well as VSSA, VSSX, VSSR are connected by anti-parallel diodes for
ESD protection.
Pins
Current Injection
3.3V/5V I/O Pins
Analog Reference
Oscillator
TEST
In the following context VDD5 is used for either VDDA, VDDR and
VDDX; VSS5 is used for either VSSA, VSSR and VSSX unless otherwise
noted.
IDD5 denotes the sum of the currents flowing into the VDDA, VDDX and
VDDR pins.
VDD is used for VDD1, VDD2 and VDDPLL, VSS is used for VSS1, VSS2
and VSSPLL.
IDD is used for the sum of the currents flowing into VDD1 and VDD2.
MC9S12E128 Data Sheet, Rev. 1.07
NOTE
DD5
or V
DD
in
range during instantaneous and
> V
DD5
) is greater than I
Freescale Semiconductor
DD5
, the