HD64F2378RVFQ33 Renesas Electronics America, HD64F2378RVFQ33 Datasheet - Page 142

• Manufacturer Part Number: HD64F2378RVFQ33
• Description: IC H8S MCU FLASH 512K 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2378RVFQ33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 3 MCU Operating Modes
• H8S/2377, H8S/2377R, H8S/2375, H8S/2375R, H8S/2373, and H8S/2373R
Bit
7, 6
5, 4
3
2
1
0
Rev.7.00 Mar. 18, 2009 page 74 of 1136
REJ09B0109-0700
Bit Name
⎯
⎯
FLSHE
⎯
EXPE
RAME
Initial Value
All 1
All 0
0
0
⎯
1
R/W
R/W
R/W
R/W
⎯
R/W
R/W
Descriptions
Reserved
The initial value should not be modified.
Reserved
The initial value should not be modified.
Flash Memory Control Register Enable
Controls CPU access to the flash memory control
registers (FLMCR1, FLMCR2, EBR1, and EBR2). If
this bit is set to 1, the flash memory control registers
can be read from and written to. If this bit is cleared to
0, the flash memory control registers are not selected.
At this time, the contents of the flash memory control
registers are maintained. This bit should be written to
0 in other than flash memory version.
0: Flash memory control registers are not selected for
1: Flash memory control registers are selected for
Reserved
This bit is always read as 0 and cannot be modified.
External Bus Mode Enable
Sets external bus mode.
In modes 1, 2, and 4, this bit is fixed at 1 and cannot
be modified. In modes 3 and 7, this bit can be read
from and written to.
Writing of 0 to this bit when its value is 1 should only
be carried out when an external bus cycle is not being
executed.
0: External bus disabled
1: External bus enabled
RAM Enable
Enables or disables the on-chip RAM. The RAME bit
is initialized when the reset state is released.
0: On-chip RAM is disabled
1: On-chip RAM is enabled
area H'FFFFC8 to H'FFFFCB
area H'FFFFC8 to H'FFFFCB