HD64F2378RVFQ33 Renesas Electronics America, HD64F2378RVFQ33 Datasheet - Page 774

• Manufacturer Part Number: HD64F2378RVFQ33
• Description: IC H8S MCU FLASH 512K 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2300r

Specifications of HD64F2378RVFQ33

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 33MHz
• Connectivity: I²C, IrDA, SCI, SmartCard
• Peripherals: DMA, POR, PWM, WDT
• Number Of I /o: 97
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 6x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Section 15 Serial Communication Interface (SCI, IrDA)
Smart Card Interface Mode (When SMIF in SCMR is 1)
Bit
7
6
Rev.7.00 Mar. 18, 2009 page 706 of 1136
REJ09B0109-0700
Bit Name
TDRE
RDRF
Initial Value
1
0
R/W
R/(W)*
R/(W)*
1
1
Description
Transmit Data Register Empty
Indicates whether TDR contains transmit data.
[Setting conditions]
•
•
[Clearing conditions]
•
•
Receive Data Register Full
Indicates that the received data is stored in RDR.
[Setting condition]
•
[Clearing conditions]
•
•
The RDRF flag is not affected and retains its
previous value when the RE bit in SCR is cleared
to 0. Exercise care because if reception of the next
data is completed while the RDRF flag is set to 1,
an overrun error occurs and receive data will be
lost.
When the TE bit in SCR is 0
When data is transferred from TDR to TSR, and
data writing to TDR is enabled.
When 0 is written to TDRE after reading TDRE
= 1
When the DMAC or DTC is activated by a TXI
interrupt request and transfers data to TDR
When serial reception ends normally and
receive data is transferred from RSR to RDR
When 0 is written to RDRF after reading RDRF
= 1
When the DMAC or DTC is activated by an RXI
interrupt and transferred data from RDR