SI1000-C-GM Silicon Laboratories Inc, SI1000-C-GM Datasheet - Page 143

• Manufacturer Part Number: SI1000-C-GM
• Description: IC TXRX MCU + EZRADIOPRO
• Manufacturer: Silicon Laboratories Inc

Specifications of SI1000-C-GM

• Package / Case: 42-QFN
• Frequency: 240MHz ~ 960MHz
• Data Rate - Maximum: 256kbps
• Modulation Or Protocol: FSK, GFSK, OOK
• Applications: General Purpose
• Power - Output: 20dBm
• Sensitivity: -121dBm
• Voltage - Supply: 1.8 V ~ 3.6 V
• Current - Receiving: 18.5mA
• Current - Transmitting: 85mA
• Data Interface: PCB, Surface Mount
• Memory Size: 64kB Flash, 4kB RAM
• Antenna Connector: PCB, Surface Mount
• Number Of Receivers: 1
• Number Of Transmitters: 1
• Wireless Frequency: 240 MHz to 960 MHz
• Interface Type: UART, SMBus, SPI, PCA
• Output Power: 20 dBm
• Operating Supply Voltage: 0.9 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Maximum Supply Current: 4.1 mA
• Minimum Operating Temperature: - 40 C
• Modulation: FSK, GFSK, OOK
• Protocol Supported: C2, SMBus
• Core: 8051
• Program Memory Type: Flash
• Program Memory Size: 64 KB
• Data Ram Size: 4352 B
• Supply Current (max): 4.1 mA
• Cpu Family: Si100x
• Device Core: 8051
• Device Core Size: 8b
• Frequency (max): 25MHz
• Total Internal Ram Size: 4.25KB
• # I/os (max): 22
• Number Of Timers - General Purpose: 4
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 1.8V
• On-chip Adc: 18-chx10-bit
• Instruction Set Architecture: CISC
• Mounting: Surface Mount
• Pin Count: 42
• Package Type: QFN EP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Operating Temperature: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1881-5

13.2. Non-volatile Data Storage
The Flash memory can be used for non-volatile data storage as well as program code. This allows data
such as calibration coefficients to be calculated and stored at run time. Data is written using the MOVX
write instruction and read using the MOVC instruction. Note: MOVX read instructions always target XRAM.
An additional 1024-byte scratchpad is available for non-volatile data storage. It is accessible at addresses
0x0000 to 0x03FF when SFLE is set to 1. The scratchpad area cannot be used for code execution.
13.3. Security Options
The CIP-51 provides security options to protect the Flash memory from inadvertent modification by soft-
ware as well as to prevent the viewing of proprietary program code and constants. The Program Store
Write Enable (bit PSWE in register PSCTL) and the Program Store Erase Enable (bit PSEE in register
PSCTL) bits protect the Flash memory from accidental modification by software. PSWE must be explicitly
set to 1 before software can modify the Flash memory; both PSWE and PSEE must be set to 1 before soft-
ware can erase Flash memory. Additional security features prevent proprietary program code and data
constants from being read or altered across the C2 interface.
A Security Lock Byte located at the last byte of Flash user space offers protection of the Flash program
memory from access (reads, writes, or erases) by unprotected code or the C2 interface. The Flash security
mechanism allows the user to lock n 1024-byte Flash pages, starting at page 0 (addresses 0x0000 to
0x03FF), where n is the 1s complement number represented by the Security Lock Byte. Note that the
page containing the Flash Security Lock Byte is unlocked when no other Flash pages are locked
(all bits of the Lock Byte are 1) and locked when any other Flash pages are locked (any bit of the
Lock Byte is 0). See the Si1000 example below.
Security Lock Byte:
ones Complement:
Flash pages locked:
Addresses locked:
0x0000
0xFBFF
0xFBFE
0xFFFF
0xFC00
0xF800
64KB Flash Device
Unlocked Flash Pages
Lock Byte Page
(SFLE = 0)
Lock Byte
Reserved
Figure 13.1. Flash Program Memory Map
00000010b
3 (First two Flash pages + Lock Byte Page)
0x0000 to 0x07FF (first two Flash pages) and
0xF800 to 0xFBFF (Lock Byte Page)
Locked when
set according
security lock
Flash pages
Access limit
to the Flash
11111101b
are locked
any other
byte
Unlocked Flash Pages
32KB Flash Device
Lock Byte Page
Address Space
Rev. 1.0
Unpopulated
(SFLE = 0)
(Reserved)
Lock Byte
0xFFFF
0x8000
0x7FFF
0x7FFE
0x7C00
0x0000
64/32KB Flash Device
Si1000/1/2/3/4/5
Scratchpad Area
(Data Only)
(SFLE = 1)
0x0000
0x03FF
organized in
1024-byte
memory
pages
Flash
143