CJ1W-EIP21 Omron, CJ1W-EIP21 Datasheet - Page 154

• Manufacturer Part Number: CJ1W-EIP21
• Description: Ethernet I/P Module
• Manufacturer: Omron

Specifications of CJ1W-EIP21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Setting Tag Data Links
6-2-4
Specifying I/O
Memory Addresses
126
Creating Tags and Tag Sets
CS1W-EIP21, CJ1W-EIP21, and CJ2H-CPU@@-EIP
CJ2M-CPU3@
2. Click the right mouse button over the registered device’s icon to display the
3. Set the IP address to match the node address (IP address) actually being
4. Repeat steps 1 to 3, and register all of the devices participating in the tag
The tag sets and set member tags required to create connections for a regis-
tered EtherNet/IP Unit must be created. The I/O memory addresses or net-
work symbols that are used in the control programs can be set for the tags.
(Using network symbols is supported only by the CJ2H-CPU6@-EIP21 and
CJ2M-CPU3@.) This section first describes the basic procedure for creating
tags and tag sets for using the Network Configurator's device parameter edit-
ing function.
1. Creating Tags and Tag Sets Using the Network Configurator's Device Pa-
Next, the following two procedures, which can be used to effectively use net-
work symbols in tags, are described.
2. Importing Network Symbols Created with the CX-Programmer to the Net-
3. Importing Network Symbols That Were Registered to Tags with the Net-
Ver. 1.0
Ver. 2.0
Ver. 2.0
Ver. 2.1
(2) When mounting the CJ1W-EIP21 to a CJ2 CPU Unit, select CJ1W-EIP21
pop-up menu, and select Change Node Address.
used in the device.
data links.
rameter Editing Function
work Configurator
work Configurator to the CX-Programmer
Unit version
Unit version
(CJ2) from the Hardware List.
Revision 1.01
Revision 2.01 or 2.02
Revision 2.01
Revision 2.02
CIP revision
CIP revision
Section 6-2