CJ1W-EIP21 Omron, CJ1W-EIP21 Datasheet - Page 92

• Manufacturer Part Number: CJ1W-EIP21
• Description: Ethernet I/P Module
• Manufacturer: Omron

Specifications of CJ1W-EIP21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Using SNMP
Using SNMP Trap
64
Other Parameters
SNMP
SNMP Trap
Parameters Dialog Box
Parameters Dialog Box
Tab Page in Edit
Tab Page in Edit
Not use SNMP service or
Use SNMP service
SNMP Port
SNMP Contact Informa-
tion
SNMP Location Informa-
tion
Authentication Check 1/2 Specifies the SNMP managers that can access the PLC.
Not use SNMP Trap ser-
vice or
Use SNMP Trap service
SNMP Trap Port
Trap 1/2
Setting
Setting
Specifies whether to use the SNMP.
If not using the SNMP service is specified, an SNMP manager will
not be able to connected from an external device.
Sets the port number to use when connecting from an SNMP man-
ager.
It is normally not necessary to change this setting.
Specifies the contact information as text.
This information can be read from the SNMP manager.
Specifies the location information as text.
This information can be read from the SNMP manager.
To restrict access to only specific SNMP managers, specify the
SNMP managers using IP addresses or host names. Community
names can also be specified (e.g., public).
Ether one or two settings can be made.
Specifies whether to use the SNMP trap.
If not using the SNMP trap service is specified, SNMP traps cannot
be sent to the SNMP manager.
Sets the port number to use to connect to the SNMP manager.
It is normally not necessary to change this setting.
Sets the SNMP manager destinations for SNMP traps.
The SNMP managers can be specified using IP addresses or host
names. Community names can also be specified (e.g., public).
Either one or two trap destinations can be set.
Function
Function
Section 3-10