CJ1W-EIP21 Omron, CJ1W-EIP21 Datasheet - Page 81

• Manufacturer Part Number: CJ1W-EIP21
• Description: Ethernet I/P Module
• Manufacturer: Omron

Specifications of CJ1W-EIP21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

TCP/IP and Link Settings
Settings on the TCP/IP Tab Page
Note
4. Place the CX-Programmer online with the PLC and transfer the settings to
5. After transferring the settings, a message will ask if you want to restart the
6. Check the 7-segment display for the EtherNet/IP Unit or built-in EtherNet/
7. If the 7-segment display is tested again after it goes OFF, and finally
Settings for the following items are provided on the TCP/IP Tab Page of the
Edit Parameters Dialog Box in the CX-Programmer.
(1) The EtherNet/IP Unit or built-in EtherNet/IP port must restart in order to
(2) If the target node address (IP address) is not set correctly, invalid device
• IP address
• Subnet mask
• Default gateway
• Broadcasting
• Preferred DNS server
• Alternate DNS server
• Domain name
• IP router table
the EtherNet/IP Unit or built-in EtherNet/IP port.
EtherNet/IP Unit or built-in EtherNet/IP port. The Unit/port must be restart-
ed to enable the settings.
IP port.
displays the IP address, it indicates that the EtherNet/IP Unit has
recognized the new TCP/IP Configuration settings (the IP address in this
case).
enable the parameter settings that are transferred to it. Verify that restart-
ing the Unit/port will not cause any problems in the system before restart-
ing it.
parameters may be set in the wrong PLC, so check the connected PLC
before downloading parameters.
Section 3-8
53