CJ1W-EIP21 Omron, CJ1W-EIP21 Datasheet - Page 288

• Manufacturer Part Number: CJ1W-EIP21
• Description: Ethernet I/P Module
• Manufacturer: Omron

Specifications of CJ1W-EIP21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Command Block
Response Block
Parameters
Important Points
260
Receiving Explicit Messages
Service
Code
1F
Class ID
Note A body format of either 8 bits or 16 bits is possible.
(2F)
C4
(*)
Instance ID
(*)
Service code (command, response): IF Hex is specified for commands. For
responses, the highest bit will turn ON and 9F Hex will be returned.
Class ID (command): Always C4 (2F).
The class ID depends on the unit version. The class ID is C4 for unit version
2.0 or later, and 2F for unit version 1.0.
Instance ID (command): The memory area to which the data is written is
specified as shown in the following table.
Address L, Address H (command): The address of the first word to which
the data is written is specified in hexadecimal as shown below.
Address L: The lower 2 digits when the first word address is displayed in 4-
digit hexadecimal.
Address H: The higher 2 digits when the first word address is displayed in 4-
digit hexadecimal.
Write data (response): The specified area and write data is returned in order
from word L (lower byte: bits 0 to 7) to word H (higher byte: bits 8 to 15).
The actual address L, address H, and number of write data bytes that can be
specified depends on the model of the CPU Unit, and the data area being
written. Do not exceed the boundary of the data areas for the PLC you are
using.
Service Code
01
03
04
05
08 to 20
Address L
9F
Instance ID (Hex)
Address H
Word data L
Write data (200 bytes max.)
Word data H
CIO
DM
WR
HR
EM, banks 0 to 18
CPU Unit memory area
Word data L
for write
Word data H
The class ID depends on the unit version.
Version 2.0 or later: The class ID is C4.
Version 1.0: The class ID is 2F.
0000 to 6143
D00000 to D32767
W000 to W511
H000 to H1535
En_00000 to En_32767
(n: 0 to 18)
Word range
Section 9-2