LAN9303-ABZJ SMSC, LAN9303-ABZJ Datasheet - Page 187

• Manufacturer Part Number: LAN9303-ABZJ
• Description: IC ETHER SW 3PORT 16BIT 56QFN
• Manufacturer: SMSC

Specifications of LAN9303-ABZJ

• Controller Type: Ethernet Switch Controller
• Interface: SMBus (2-Wire/I²C)
• Voltage - Supply: 3 V ~ 3.6 V
• Current - Supply: 190mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 56-QFN
• Product: Ethernet Switches
• Standard Supported: Yes
• Data Rate: 10 Mbps/100 Mbps
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 3 V
• Supply Current (max): 0.19 A (Typ)
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• For Use With: 638-1095 - EVALUATION BOARD FOR LAN9303
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 638-1082

Small Form Factor Three Port 10/100 Managed Ethernet Switch with Single MII/RMII/Turbo MII
Datasheet
SMSC LAN9303/LAN9303i
13.2.7.4
31:30
28:16
BITS
15:0
29
RESERVED
General Purpose Timer Enable (TIMER_EN)
This bit enables the GPT. When set, the GPT enters the run state. When
cleared, the GPT is halted. On the 1 to 0 transition of this bit, the
GPT_LOAD field of this register will be preset to FFFFh.
0: GPT Disabled
1: GPT Enabled
RESERVED
General Purpose Timer Pre-Load (GPT_LOAD)
This value is pre-loaded into the GPT. This is the starting value of the GPT.
The timer will begin decrementing from this value when enabled.
General Purpose Timer Configuration Register (GPT_CFG)
This read/write register configures the General Purpose Timer (GPT). The GPT can be configured to
generate host interrupts at the interval defined in this register. The current value of the GPT can be
monitored via the
Purpose Timer," on page 131
Offset:
General Purpose Timer Count Register
08Ch
DESCRIPTION
for additional information.
DATASHEET
187
Size:
(GPT_CNT). Refer to
32 bits
TYPE
R/W
R/W
RO
RO
Section 11.1, "General
Revision 1.4 (07-07-10)
DEFAULT
FFFFh
0b
-
-