S9S12XS256J0CAL Freescale Semiconductor, S9S12XS256J0CAL Datasheet - Page 166

• Manufacturer Part Number: S9S12XS256J0CAL
• Description: MCU 256K FLASH 112-LQFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of S9S12XS256J0CAL

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 40MHz
• Connectivity: CAN, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 91
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 8K x 8
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LQFP
• Processor Series: S12XS
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN, SCI, SPI
• Maximum Clock Frequency: 40 MHz
• Number Of Programmable I/os: 91
• Number Of Timers: 12
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: DEMO9S12XSFAME, EVB9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Interrupt (S12XINTV2)
4.5.3
4.5.3.1
Every I bit maskable interrupt request which is configured to be handled by the CPU is capable of waking
the MCU from stop or wait mode. To determine whether an I bit maskable interrupts is qualified to wake
up the CPU or not, the same settings as in normal run mode are applied during stop or wait mode:
The X bit maskable interrupt request can wake up the MCU from stop or wait mode at anytime, even if the
X bit in CCR is set. If the X bit maskable interrupt request is used to wake-up the MCU with the X bit in
the CCR set, the associated ISR is not called. The CPU then resumes program execution with the
instruction following the WAI or STOP instruction. This features works following the same rules like any
interrupt request, i.e. care must be taken that the X interrupt request used for wake-up remains active at
least until the system begins execution of the instruction following the WAI or STOP instruction;
otherwise, wake-up may not occur.
4.5.3.2
Interrupt request channels which are configured to be handled by the XGATE module are capable of
waking up the XGATE module. Interrupt request channels handled by the XGATE module do not affect
the state of the CPU.
166
•
•
•
Processing Levels
If the I bit in the CCR is set, all I bit maskable interrupts are masked from waking up the MCU.
An I bit maskable interrupt is ignored if it is configured to a priority level below or equal to the
current IPL in CCR.
I bit maskable interrupt requests which are configured to be handled by the XGATE module are not
capable of waking up the CPU.
Stacked IPL
IPL in CCR
Wake Up from Stop or Wait Mode
CPU Wake Up from Stop or Wait Mode
XGATE Wake Up from Stop or Wait Mode
7
6
5
4
3
2
1
0
Reset
0
Figure 4-14. Interrupt Processing Example
S12XS Family Reference Manual, Rev. 1.11
L4
0
4
L7
0
4
7
L1 (Pending)
L3 (Pending)
RTI
0
4
RTI
0
3
RTI
Freescale Semiconductor
0
1
RTI
0