MC9S12XDP512MAG Freescale, MC9S12XDP512MAG Datasheet - Page 994

• Manufacturer Part Number: MC9S12XDP512MAG
• Manufacturer: Freescale

Specifications of MC9S12XDP512MAG

• Cpu Family: HCS12
• Device Core Size: 16b
• Frequency (max): 40MHz
• Interface Type: CAN/I2C/SCI/SPI
• Total Internal Ram Size: 32KB
• # I/os (max): 119
• Number Of Timers - General Purpose: 12
• Operating Supply Voltage (typ): 2.5/5V
• Operating Supply Voltage (max): 2.75/5.5V
• Operating Supply Voltage (min): 2.35/3.15V
• On-chip Adc: 2(24-chx10-bit)
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 125C
• Operating Temperature Classification: Automotive
• Mounting: Surface Mount
• Pin Count: 144
• Package Type: LQFP
• Program Memory Type: Flash
• Program Memory Size: 512KB
• Lead Free Status / RoHS Status: Compliant

Chapter 24 DG128 Port Integration Module (S12XDG128PIMV2)
24.0.5.7
Read: Anytime in single-chip modes.
Write: Anytime, except BKPUE which is writable in special test mode only.
This register is used to enable pull-up devices for the associated ports A, B E, and K. Pull-up devices are
assigned on a per-port basis and apply to any pin in the corresponding port currently configured as an
input.
996
PUPKE
BKPUE
PUPEE
PUPBE
PUPAE
Reset
1. Register implemented, function disabled: Written values can be read back.
Field
7
6
4
1
0
W
R
PUPKE
Figure 24-9. S12X_EBI Ports, BKGD, VREGEN Pin Pull-up Control Register (PUCR)
Pull-up Port K Enable
0 Port K pull-up devices are disabled.
1 Enable pull-up devices for Port K input pins.
BKGD and VREGEN Pin Pull-up Enable
0 BKGD and V
1 Enable pull-up devices on BKGD and V
Pull-up Port E Enable
0 Port E pull-up devices on bit 7, 4–0 are disabled.
1 Enable pull-up devices for Port E input pins bits 7, 4–0.
Note: Bits 5 and 6 of Port E have pull-down devices which are only enabled during reset. This bit has no effect
Pull-up Port B Enable
0 Port B pull-up devices are disabled.
1 Enable pull-up devices for all Port B input pins.
Pull-up Port A Enable
0 Port A pull-up devices are disabled.
1 Enable pull-up devices for all Port A input pins.
S12X_EBI Ports, BKGD, VREGEN Pin Pull-up Control Register (PUCR)
1
7
on these pins.
= Unimplemented or Reserved
BKPUE
REGEN
1
6
pull-up devices are disabled.
Table 24-10. PUCR Field Descriptions
MC9S12XDP512 Data Sheet, Rev. 2.21
0
0
5
PUPEE
REGEN
1
4
Description
pins.
PUPDE
0
3
1
PUPCE
0
2
1
PUPBE
Freescale Semiconductor
0
1
PUPAE
0
0